2nd Gen Non-Engine/Transmission if you are on the fence about sport lights DO IT already

[WDixon27]

just did mine and my god i can see, i did relays a couple years ago so i didn't need to screw with that, i spliced into the high beam side of the existing socket for the high beam and ran a new ground, it actually worked out kinda cool as with the lows on the small filament in the inner light runs low and it swaps with low beam when you kick on the highs like this, low Oo==oO high oO==Oo you still get the everything while the switch is rocked back OO==OO

 

[The patriot]

I did mine several years back

It made a WORLD of difference!

I have it wired so that all 4 bulbs are on in low beam mode and all filiments burn on hi beam. Oo.

 

[WDixon27]

mine are in high beam mode on the low beam side and and low in the high position, they swap when you go into high beams, it couldn't work better as the projectors have a decent cut off and don't have much light spillage above the aim point, i didn't plan it that way but i am very happy with the result and the fact i don't need to rewire it to do something like that, i would not put hid's in them like some people do as without a good lens or projector you kill everybody around you because the light goes everywhere with the reflector housing style light, there is enough of that crap on the road already and they usually have 8k or higher bulbs in them that murder your eyes

 

[The patriot]

Where I am I seldom get the opportunity to use my hi beams.

 

[WDixon27]

ditto, damn city