Here I am

In-line filters...

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Whos 06 at Goerends Bros

Engine codes 2006?

Status
Not open for further replies.
I work at a Dodge dealer, and we constantly run into fuel contamination in trucks with bad injectors. We have a few customers wanting to put an in-line filter that filters down to a lower micron. Was just wondering of any kits or ideas anyone has come up with to help controlling dirt contamination. We install the recommended 7 micron Mopar filters, but with some of the farm and work trucks that run fuel stored in tanks out in the middle of BFE, dirt still seems to get through... any ideas would be great
 
I am running the filter from Glacier Diesel with the big hose and have a fuel pressure gauge to moniter the filters. so far it stays about 9 psi but I have pulled it down to 5 psi when I put my foot into it.
 
Glacier Diesel Power 2 micron fuel filter and 20 micron fuel/water seperator connected in-line and hung under airhorn.
 
Last edited:
Status
Not open for further replies.
Back
Top