Here I am

Injector pump wrench

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Please Help!

W250 king pins

Status
Not open for further replies.
Would you guys be interested in buying a new wrench not heated and bent, that will reach all 3 injector bolts and also loosen the afc boost banjo nut for cheap.



Let me know and if enough interest is generated PDR might buy enough and make them available for sale.
 
Ok Guys, Heres the scoop. Were looking at $10. 00 us for the wrench and they are availible now.



I checked the sizes again and the run right now has changed from a 13mm - 12mm to 13mm - 11mm. So the 11mm isn't going to fit the banjo bolt but any 12mm wrench or socket will work and the 13mm end will do the trick for the 3 injection pump nuts.



Phone in orders toll free to PDR at 1-866-888-9396. and ask for a 1st gen injection pump wrench.



mark

PDR - Black Sheep Racing
 
Status
Not open for further replies.
Back
Top