Engine/Transmission (1994 - 1998) injectors,dv's,dv holders

[SFrey]

just got my injectors,dv's, and dv holders back from a guy in michigan. (j. l. machine) awsome work,fast turn around,great price. made the injectors to a 5-16,cut the delivery valve down,and enlarged the dv valve holder.



scot

 

[wildmanben]

ok good. Got them in yet?

 

[KingS]

that is where I got mine they are awesome but watch out I took my stock head gakset out and the first drag launch I did with mine and the stock turbo but man was it a launch yea ha!

 

[Cooker]

I hope you have an upgraded turbo because that is way to much fuel for a stock turbo.

 

[WDimig]

i agree, you need more air, and the stocker is not going to put out what you need.



wes

 

[Got Smoke?]

that 180 pump you have is just a little under my 215 pump. With just #10 plate, 370's, and laser cut DV's I was able to hit 53PSI of boost @ 1/2 throttle on my stock HX35.



Make sure you upgrade your turbo before you install those DV's or you'll be calling a tow truck the first time you cut 'er loose!

 

[Hammer]

I hope you have an upgraded turbo because that is way to much fuel for a stock turbo.

Cooker. .

I know you do not my old buddy Scot here so I'll draw a picture for you,LOL. Buys the truck about a month ago or so and had it lifted,huge tires,billett transmission and convertor,has a new rear being done,Thuren trac bar,injectors,dv's,ATS intake/exhaust,5" exhaust,Turbo,Classic Lines Stainless Brake Lines,0 plate,Fluidampr,different mirrors,dash still tore apart for more mods,gauged and a partridge in a pear tree,,LOL :-laf :-laf . I am convinced his wife is going to string his scrawny rear end up to the biggest tree down there on his land and he will end up MIA on us. Oh yeah,lest I forget his strip the injector lines and chrome them yet. If you would have seen this homely looking Ram when he bought it you would never think it was the same truck.



Wes. .

HUSH..... Don't give him anymore bad ideas... LOL.



Mark...

Why would you even think of 53lbs on a HX35?. I guess the better question would be HOW did you see 53lbs with a HX35 as they will not reach that without breakage.



BTW. .

Need I say its been down now for about a month. Scot has been seen driving around in this small little whooptie doo nacho wagon with the chainsaw sounding muffler... ... ... . ... LOL... . Andy

 

[Got Smoke?]

Mark...

Why would you even think of 53lbs on a HX35?. I guess the better question would be HOW did you see 53lbs with a HX35 as they will not reach that without breakage.



... Andy

Andy... ... don't ask me how it survived because that's still a to me as well!?!? They had only been in for a day when a Duraslug decided he wanted to play as I was easing by him, I rolled into it 1/2 throttle and something caught the corner of my eye... looked at the boost gauge and it was at :--) 53psi! I quickly got back out of it "gently" and eased on down the road. Those DV's came out till I got another turbo that could handle them. :-laf



Bill Watson "Farmall" (here) "Bouncer" (Thedieselgarage.com) can vouch for me as his did the same thing with a set of the same DV's!

 

[WShupe]

J. L. Machine, anybody got their phone# or website address?

 

[Cooker]

J. L. Machine, anybody got their phone# or website address?

231-853-2626

 

[WShupe]

Thanks, I have a project for them.

 

[Timebomb]

Mark...

Why would you even think of 53lbs on a HX35?. I guess the better question would be HOW did you see 53lbs with a HX35 as they will not reach that without breakage.

Now Andy you remember the "Bone stock" first gen I had, I made 60psi on a stock Hx35/wg14cm... ... ... ... ... ... ... ... . Its still alive LOL