Here I am

Engine/Transmission (1998.5 - 2002) injectors install manuals

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

2nd Gen Non-Engine/Transmission Brake Master Cylinder R & R Tips

2nd Gen Non-Engine/Transmission Back-up light WOES

Status
Not open for further replies.
hi guys im stumped about the injector nozzle install of the edge jammers stage 3 is there a manual online that can be emailed to me ? i am desperate as a hog needed slop to figure out how these nozzles go in > thanks alot guys i have my lines of and this 4 inch looking nozzle doesnt appear to come apart and the new nozzle to apply , doesnt look to mate to what i have out as i think it is the stock injector
 
This is why the avearage tdr member should not be persuaded into purchasing the injector tips only.



its not a simple swap :(
 
http://pics2.tdiclub.com/pdf/injector_install_howto.pdf

Copy this link this is what i used to do my swap . Follow the directions it goes pretty easy on the bosio nozzles. I used a piece of steel in the vice and set the top of the injector (the slot) on the steel and resting on the vice . CLEAN,CLEAN, CLEAN, and follow their directions and it's a pretty easy job

good luck . Dirk
 
Last edited by a moderator:
hey guys thanx i am so stupid . thanx for your help iam running hard and strong with the new nozzles i am impressed with the performance and idle and egts.
 
Status
Not open for further replies.
Back
Top