Installing Boost Pressure Gauge on 2011

[NStates]

I am in the process of installing a triple gauge set from my 2008 to my 2011 3500 RAM. The 2008 used a boost adapter that replaced an intake manifold bolt. Will the same boost adapter work on the 2011?



Thanks,



ROVOL



2011 RAM 3500 Laramie Quad Cab 4X2



6. 7 Liter I6 Turbo Diesel Engine, 6 -Speed Automatic 68RFE Transmission, 3. 73 Differential, Brilliant White, Integrated Navigation System, ISSPRO Gauges, Transfer Flow Fuel Tank, PullRite 20,500 Super 5th Hitch, RAM Spray Bed liner , Integrated Brake Controller, PML Deep Transmission Pan, Custom Graphics, Pull a Mobile Suites Fifth Wheel.

 

[n7gxz]

I believe it will. I used one of those on my new truck.



You're going to find a problem trying to connect the backlights into the dash light dimmer. The dashlights have been changed to 5V LED controlled by the computer. I'm going to be working on getting my backlights connected today. I'm going to tap into the cab clearance lights (white w/ green tracer in the A-piller) and then put a POT inline to control the gauge backlights. Since I don't change the dimmer much once I get it set the POT will just be secured under the dash.



Kevin