ISSPRO

[sheepdip]

I'd like to pick up some Isspro guages. Anybody close to me carry them?

 

[EMDDIESEL]

Read the post on "The right Guages" Gauges are becoming a really popular issue here

 

[Archive]

I bought my AutoMeter gauges from them #ad
. They have NOT seen my last order #ad
, good top work with. I ran Isspro on my '95. I did not like the lighting difference between the gauges. They have EV series gauage now. Enhanced visibility. I seen them lighted and they look 100% better than my old gauges.
Sam

------------------
2001 RAM H. O. 6Sp 2500 SLT 4x4 Quad Cab, 4Wheel Disc, 4. 10 Limited Slip, Fog Lights, Muffler removed, Silence Ring Gone, Autometer Pro Comp 60# Boost & Pyro, Banks High Ram (Red), Cummins Red Valve Cover, K&N RE-0880, Skyjacker 2. 5 lift Class 2, 7218 Dual steering stabilizers, Custom Pro Fab Trackbar (sweet), EGR Flares (nice fit), Centerline Comet III 16x9. 5 with Goodyear MT/R 315/75R16, Smittybuilt stainless nurf bars, ExTang BlackMax tonno, THIS IS NOT A HOBBY, THIS IS AN ADDICTION !!! MAINLINING DIESEL !!!

 

[Blackdog]

I also don't like how the Isspro Boost guage lights up and plus it's only a 50lbs guage. So I'm gettin ready to put in a DiPricol 60lbs guage in and I'm gonna leave my Isspro Pyrometer b/c I like the way it's setup and it lights up really well.

------------------
Test Mule for DMZ Performance
2001 Black 24v Cummins, 3/4 ton, QC, SWB, 4x4, Auto, Every Option Available, Agate Leather, 2. 5" Skyjacker Lift, 33x12. 50 BFG Mudders on 16. 5x9. 75 Weld Super Single II's, White Face Guages, Isspro Boost/Pyro Guages on Dual A-Pillar, Cobra 29 LTD Soundtracker Nightwatch CB, Westin Chrome Brush Guard, Chrome Rocker Panels, 4" Chrome Tip, Dee Zee Diamond Plate Toolbox, Bed Rails, Tailgate Protector, Drawtite Removable Gooseneck Ball, Straight Piped, Silencer Ring Removed, K&N RE-0880, HX35 w/ 12cm Housing, JVD, BIG Custom Injectors, Pro Torque Convertor, Performance Custom Valve Body, Shift Kit, Holley Pro Lift Pump, Custom fuel lines

"Dodge Makes It, Cummins Shakes It"

#3 Dale Earnhardt Forever!

 

[BLACKRAM]

Isspro just came out with a backlit instrument called the EV series. Mine work perfect.

------------------
1999 2500 4x4, auto, 3. 54 LSD, HD241, Quad cab SLT, Blk Sport Pkg, 16x8 Eagles, 285 Bridgestone AT, Bilsteins, SS ladder bars, 100% Amsoil, 80/100w lights, Valentine One, DTT TC/vb, Mag-Hytek trans pan, DD2's, DD TTPM, Isspro gauges.
1992 SC400
1978 Mooney 201 IFR

 

[Sig]

Sheepdip, Isspro is located in Portland. I have their Pyro, transmission, and Boost guages on a pillar. Some friends of mine do also. My pyro guage needle hangs up sometimes at about 300 after shutdown. The two friends of mine have guages that have never been below 340. The other thing is, the three guages I have all have different illumination levels. The transmission guages is bright enough at night but the boost gauge is hardly readable. I asked Isspro if there was a way to adjust brightness or get a brighter bulb, but the answer was no to both. I was told that a brighter bulb would burn too hot.
If I had to do it again, I would go with another company.

Sig

------------------
2001 2500, QC, 4X2, SLT, 24 valve, ISB, A/T, Tow Pkg, Bright White Clear Coat
DTT VB, TQ, Smart Box, PacBrake, PowerEdge EZ Box, Bosch 275 Injectors, AutoMeter Triple Pillar,Isspro Gauges Pyro/Trans/Boost, Trans Cooler, Avitol Alarm, OEM Roof Lights, OEM Fog Lights, Flip/Tow Mirrors, Tint Windows, Cobra CB, Ram Polished 3rd Brake Light, Eyebrows, Pace Edwards Rolltop, Toro Bed Liner, Carr Super Hoop/Deluxe HoopII Steps, Husky Front/Rear Mats
1998 33. 5' Hitchiker Discovery Triple Slide 5th Wheel.

My Pix.com

 

[Fireman Dave]

I have the Isspro pyro, boost, and transmission gauges mounted on the pillar, and I have no complaints. I got mine from Diesel Injection Service (Lubbock, TX). Very nice to work with. I had to wait for the boost to come off back order, though. The lighting seems fine to me. I got mine in April.
http://www.dieselpage.com/main.shtml

 

[ata]

Sheepdip, Try Oregon Fuel Injection, Inc.
4232 west 7th Ave.
Eugene, OR. 97402
(541)485-1434
800-452-5055
Ask for Dan in parts.

 

[TowPro]

This is where I got mine also. Great people to deal with.

Originally posted by Fireman Dave:
I have the Isspro pyro, boost, and transmission gauges mounted on the pillar, and I have no complaints. I got mine from Diesel Injection Service (Lubbock, TX). Very nice to work with. I had to wait for the boost to come off back order, though. The lighting seems fine to me. I got mine in April.
http://www.dieselpage.com/main.shtml