Engine/Transmission (1994 - 1998) KDP jig

[jrob001]

Gentlemen, is there a KDP jig floating around anywhere? I have been out of

the TDR for about three years now due a battle with cancer and I have now won that battle and am looking at buying a 97' 2500. My memory tells me the 97 models had the most occurances of the KDP. I had a 94' that I went the jig route with but now I am not sure if the jigs are still around. Any help or suggestions would be greatly appreciated. Thanks

 

[tp0d]

Yep I manage the jig in the NorthEast. It is currently in balmy Minnesota, and I believe the guy is done with it.

I can ship it anywhere, no prob.

PM me.

-j

 

[champspa]

I took the front cover off, it may be better, there are other bolts to tighten in there.

 

[MLee]

I have always felt if your going to jig the KDP, remove the other 18 bolts and do it right, Tab it!!! Check those bolts under that cover and re-lock tight them. If one of them comes out its just as bad as the pin or worse. It adds just a little more time to do it right.