Lack of power in '03 w/HE351, smarty jr,

[100 Proof]

...100proof your dyno numbers are pretty good. Where did you have the Smarty set at? What boost and egt did you see during the run. I'd be curious at where my truck(s) would be...

Those dyno numbers were before I got the Smarty. I had a BD downloader stacked with a VA 3.1. That was also before I got the HE351. Boost was 28.2 and I don’t recall the EGTs but I think I was near 1,300. The Smarty set on level 5 outruns that old setup though. I need to get back on the rollers one of these days.

My OFE did not survive past 80,000 miles. I’ve got the dual disk in there now and it has held up really well.

 

[CToney]

I put in new 60 psi boost gauge and it is reading the same as the 35 psi one I took out. This is quite frustrating. Spending $ and not finding a solution. Maybe I should get a smarty touch then I could keep track of more things. One last thing I will try is replacing the nylon tubing to the boost gauge. I need another 1/8" brass ferrule though as I lost one that came with the new gauge.