Archived Lift pump failure

[darkhorse]

This should be no big deal as I'm in my driveway & I have a FASS HPP to put in but I'm stuck on step one. Pulling the fuel line off the tank module. Is this possible without lifing the bed or dropping the tank? With a mirror, I can see the tow little blue plastic tab I have to squeeze but for the life of me I can get my fingers on only one of them. Any ideas would be appreciated. Thanks.

 

[K5IP]

You can loosen the belly bands on the tank and drop it a few inches. Makes access easier.

Rog

 

[darkhorse]

Thanks for the tip, Rog. I did manage to get the black part of the fitting off but the blue tab part is still in the tank fitting. From the FASS install pics, I see that part in the guys hand so I'm back to try to remove that.

 

[darkhorse]

Got it! Only one skinned knuckle. :-laf

 

[darkhorse]

Problem solved. FASS HPFP installed. Starting pressure: 1. 5 psi. Running it pegs my 16 psi Westach Gauge. I cant make it move with the throttle. I think I'd better call them & get the low pressure spring.