Looking for suggestions

[rmrc]

I currently have a new three gauge A-Pillar. (Was given as a gift).



I have no plans to increase the horse power with injectors, boxes, ect.



A Fuel Pressure gauge is a definite and I guess a transmission temp gauge would be a good second choise.



What would you suggest for a third gauge???? Boost, EGT????



Thanks in advance... .

 

[Joe G.]

EGT. If nothing else it can be used to avoid hot shut downs.

 

[WBusa]

Definitely EGT... the single most-informative gauge I own.

 

[Hammer]

Rich...

In a 3 gauge setup for a 24 valver most guys will use a EGT,Boost,Fuel Pressure. If you do not want the boost because your not interested in doing any HP mods the switch it with a trans temp gauge... ... ... . Andy

 

[Beast2B]

I'd say the Westach combo boost/EGT. They seem a bit harder to get info from in a quick glance, but if you aren't bombed to a point where you need to monitor the conditions constantly it would work great.

 

[Tcolesanti]

I would use Westtach Boost/EGT, fuel pressure and transmission temp. Three gauges and all the info you NEED.