Losing my mind with suspension pops and clicks

[AMink]

I'm about at my wits end with my front end. It tracks well, tires wear well, but there are just these barely noticeable pops/clicks that I can feel through the wheel and floorboards. This happens on any surface, but not all the time. I have replaced the shocks (Bilsteins), steering box, tie rod ends, sway bar links, sway bar bushings, Pitman arm, u-joint/stub shafts, and drive line u-joints. I have a steering box brace. It was just in the shop (they did the wheel u-joints) and they said everything was tight including the steering shaft. The only thing left that I can think of are the control arm bushings. Am I missing anything else that would cause the "loose" feel? It's like something should be *just* a little bit tighter. #@$%!

 

[BigPapa]

I didn't see where you've done anything with the track bar.

 

[cerberusiam]

Might as well finish it off with control arm bushings, track bar bushings, and ball joints.

 

[seafish]

Track bar bushings...these trucks can eat them up in less then a year.

 

[Killer223]

don't forget the body mount bushings. and i think in the steering shaft there are some as well.

 

[AMink]

Might as well finish it off with control arm bushings, track bar bushings, and ball joints.

Forgot, I did Carli ball joints and track bar bushings.

 

[Ozymandias]

don't forget the body mount bushings. and i think in the steering shaft there are some as well.

I second this! On mine it have been the body mounts, i burnt a lot of money to find this out.
They wore out and then had metal to metal contact.