Archived Lost power

[BurnsD]

-everything was fine but after idleing at a short light she just lost power.

Barely could move with the flow of traffic. Got home and checked,Fuel pressure is fine and new fuel filter, for a week now it comes and goes with no warning or symptoms. Any ideas?

04. 5

Auto, air raid, BDTD600, 4" exhaust

 

[BurnsD]

CODES -2269, 0111, 0113 - these codes clear and come back for the last 25000 miles

 

[AKAMAC]

Have you tried pulling the BD 600 off? Sounds like limp mode. Mike

 

[BurnsD]

Is limp mode in the BD or ecm

 

[RankRam]

Limp mode is ECM realated.

 

[AKAMAC]

ECM, You may also have a problem with the rail pressure relief valve. There is a thread in another forum about capping it. Try doing a search for it. Mike



http://www.tdr1.com/forums/showthread.php?t=161372

 

[BurnsD]

UPDATE

removed BD and reset codes - all was well

replaced BD and troubles started within 20 miles. I then checked all connections and things were OK for about 5 miles. Wiggled wires where BD goes to computer and OK for a few more miles, played with wires again OK for a while, removed BD, OK for a day so I have it down to a faulty harness in BD. As it is probably 2 years old I will call BD and see if there is anything they will do. I'll post an update when I know

 

[BurnsD]

Chatted with BD today and as expected -- out of warranty-- I have scanned the posts here and obviously it is a somewhat isolated problem so no flames or hard feelings.

Looks like I'll be buying a new box.

Triple Dog - suggestions on best pricing?