Here I am

2nd Gen Non-Engine/Transmission Low beams don't work

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff
Status
Not open for further replies.
Heres the problem:



When i turn my head lights on, only my parking lights and dash lights come on. and when i turn my high beams on while the low beam are in the on position they won't come on. But if i turn my lights off and the use the turn signal leaver to turn the highs on they work fine. Is this the head light switch problem or multifunction switch problem?
 
Status
Not open for further replies.
Back
Top