Low Boost Issue Solved

[JThacker]

I posted about 3 weeks ago about my Edge Juice/Attitude that wouldn't produce more than 33-34 lbs. boost, thanks to the help of sag2 I worked through the fuel system and everything was OK, lift pump, cp3, relief valve. I sent the box back for an update and had to tell them 3. 73 and 6 speed I also got the HOT upgrade, in the meantime I installed mechanical gauges. I got the box back and whoa!!! Every level is much hotter and I can hit 40 on level 3 (80hp) So the culprit of the low boost was the box, I don't know what they did but I sure like it, I think the programmer must be much different than when the juice first came out, I got one of the first ones that came out. Anyway, I am getting a sps62 for Christmas to make full use of the box now. Also, where can I get a stainless downpipe to go from the elbow the the muff eliminator pipe on my MBRP exhaust to get rid of that last rusty exhaust piece. Jay

 

[JasonCzerak]

I posted about 3 weeks ago about my Edge Juice/Attitude that wouldn't produce more than 33-34 lbs. boost, thanks to the help of sag2 I worked through the fuel system and everything was OK, lift pump, cp3, relief valve. I sent the box back for an update and had to tell them 3. 73 and 6 speed I also got the HOT upgrade, in the meantime I installed mechanical gauges. I got the box back and whoa!!! Every level is much hotter and I can hit 40 on level 3 (80hp) So the culprit of the low boost was the box, I don't know what they did but I sure like it, I think the programmer must be much different than when the juice first came out, I got one of the first ones that came out. Anyway, I am getting a sps62 for Christmas to make full use of the box now. Also, where can I get a stainless downpipe to go from the elbow the the muff eliminator pipe on my MBRP exhaust to get rid of that last rusty exhaust piece. Jay

So edge admits to low boost problems? Did you just get low boost all the time? or in cold weather?



For me when it's below 40-ish (out site temp), I can't get much over 32psi. if I sit and idle for a bit, or just let the ambient temps around the truck get warmer. go out,, hammer it I can spike 40 and hold it for a run or two and back to 32-psi.