Hi, first time post long time reader, hope i can get some help with my boost problem, i installed a super b turbo and mach 1. 5 at the same time, also have a smarty downloader, my problem is there is huge turbo lag, doesn't seem to start spooling until 15-1600 rpm's then will not go past 32. 7 psi, i have the x monitor, i have adjusted the waste gate arm and also installed a small restricter on the boost elbow, from what i have read and heard i should with no problem be getting 40 psi + ? i does seem to dump lots of black smoke when taking off from a stop under heavy right foot. any help would be appreciated and thanks in advance