Lowering kit for front end of 06 2wd 2500?

[Morse]

I've seen many posts concerning lowering the rear, though I'd like to lower the front. Any info or help is appreciated. . Thanks. .

 

[EEdmondson]

I'm not being critical, but why?

 

[DShore]

Try AirRide Technologies in Phoenix, AZ. They have front lowering for 2WD 3500's 94-02... do not know about the later models. No email address, but I have a help line number: 1-800-819-6503.



I believe the front unit for these trucks runs about $600 without control air management system. Hope this helps

 

[Morse]

I bought this truck to be my sports car, not a normal truck. . It's a standard cab that I cut down and put a short bed on when it had 2000 miles on it. It also has 20's, a Leer tonneau cover, and several performance mods. It will be running the quick diesel 12. 00 class in Bowling Green. I can't get a diesel sports car/daily driver, so I built my own. I have a dually for towing trailers and work. . It now has around 3400 miles on it...

 

[Lorenz]

Sounds like a nice build. I've considered putting the 2. 25 shock on the 2wd. Are you doing the fab work, or is it going to a shop for the goodies?

Pictures?

 

[Morse]

I took it to a buddies shop in KY. . I have a friend there that's a very good welder. . I don't trust myself with that. . I just come up with the ideas and assist in figuring out how to do it. There should be picture on the NHRDA website from the race this past weekend. . I don't know how to post pictures on here...

 

[phellenberg]

Lowering 2WD

I took it to a buddies shop in KY. . I have a friend there that's a very good welder. . I don't trust myself with that. . I just come up with the ideas and assist in figuring out how to do it. There should be picture on the NHRDA website from the race this past weekend. . I don't know how to post pictures on here...

I am interested in any info available about lowering a 2WD Dually. I am trying to gather info.

Paul

k4ja@k4ja.com