Here I am

M-D TDR Wrench Day & Farewell BBQ For Wiredawg Saturday March 15th...

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Dyno Day in PA, April 19th, Who's Going?

MIR on the 26th (Big Rig Nationals -DHRA)

Fuel Guage

Will anybody be bringing a mechanical fuel pressure Tester. I've been getting some funny readings lately on my electric gauge :{ and want to double check the accuracy of my gauge before I replace the fuel pump. I'll be bringing some homeade salsa and chips and some drinks.
 
Gotcha Covered!

tabell:



I have a mechanical fuel pressure gauge with me all the time. Feel free to use it.



Wiredawg
 
Whoop,Whoop...Food Count and Rambles...

Here is the food as of today when I tallied it... .



Wiredawg-Brisket(Oohh yeah)& Sausage

FFutch-"Bubba Gump shrimp"

Larry Willard-Baked Beans(the new bean man)

Sherry Lundvall-Macaroni Salad,Cake

Kenny M-Soda

DodgeSales-Hotdogs,Burgers,Soda & Beer

Tmacc-Desert & the Offical M-D TDR B. O. M. Bing Goggles

Jeff Knight-Plates & Utencils

Ladyjaine-Cookies & Bread

Hammer-My Weber and something for on it.



Thats all I see for now I'll double check it later...



Jeff Knight and those North going... .

I am planning on leaving my area about 7am. If you would like to have me as your designated industrial area tour guide meet me at the Rutters store off Exit# 18. . Prospect Street of I-83(SB-exit and turn left off ramp. . NB exit and turn right off ramp,at first light on left)). I'll be there about 7am or a little earlier. I'll run the back way down as its shorter milage and timewise about the same.



Looks like Rammin On has deserted us as he's too busy at the shop and getting ready to depart. Sorry to read that and he will be sorely missed. Also,Sled puller has had to pass due to his truck being prepped for his pull next week in Columbus. Wish him luck as this is a invitation only(exibition) pull indoors and he will be with some of the heavy hitters along with seeing alot of the backside of the feared Thornville,OH "White Dodge". Good Luck Gene!!!.



Well all I can say now is it better warm up a little or I'll be there with a filthy truck,still not feeling to snappy and not up to washing the dirt off. . See ya all tommorrow... ... . Andy
 
More disappointing news

Just got off the phone with **ICEMAN** and his back is too painful for him to make the trip. I told him that I would get all the treasurer's stuff from Wiredawg and bring it to him next week. Hope we don't have many more cancellations.

John:{
 
I'm bringing my grill, and sodas.

Anything else we're lacking at this point? (other than warmer temps. )

edit:

picked up a coupla packs of "Gut -Grenades" too.

(Hot dogs)



Jstyer Quote:

Shovelhead that should put us at the intersection of 70 & 695 somewhere about 7:45 - 8:00, if you wanted to wait on the shoulder for us. I downloaded the map and directions to my GPS if we get lost.



I should be on the shoulder waiting for y'all,... ... ... I hope:rolleyes:

Don't wanna see "Wally Da Wino" again. :D
 
Last edited:
sorry fellows, i thought i'd be able to make the ride but my back is getting worse and the pills i'm taking for pain:eek: you wouldn't want me on the road with you all anyway. i'm scheduled to see a surgen monday for my 2 ruptured disc so hopefully i'll get this taken care of and not miss any more events.

i even had her shined up for the get together
 
Don

sorry to hear you won't make it. You shouldn't be out there rubbing on the truck with a bad back and then you would have been ok to come along. How do I know that?... Because I did the same thing with the same results!!!



tabell

There will be other women there.

Larry
 
Since it looks like most of the real food is covered, I'll bring a few dozen donuts and the like so we'll have something to eat in the morning.



Shovelhead -



If you don't mind, I'll hog the shoulder on 695 with you waiting for the others. Since you're coming from VA, I'll assume you're waiting on the shoulder of 695 and not getting off on 70?



I've only been to the Dyno day up in PA, so I don't think I'll look familiar to anyone. I'll be the gray sport 2500 (in case there's a plethora of Rams intentionally parked on the shoulder of 695, since everyone knows they don't break down;) )



Hope to see you all there!





PS In case there's not enough wrenchin' to do, I've got a full 4" exhaust to put on, Edge Comp to install, a boost and EGT gauge to finish, and a TransGo shift kit to install
 
delliot,

That's the plan as of now.

I'm planning to sit just past the 70 entrance ramp to 695 north?/west? and wait for the "Train" to arrive.



Ya can't miss a black dually sittin' out there I hope.

I'll be lookin' for you if you get there first.
 
Hi tabell

I'm female. I'll be there bring your girlfriend. I even cleaned up my truck for this. :rolleyes:

Sorry to hear ICEMAN can't make it. ICEMAN you should've brought a dirty truck
 
tabell,



I'm female, too and I'll be there.



I just put the last two cookies in the oven. They never seem to come out even. The bread machine will be started before I go to bed tonight. Cinnamon Sunrise, I think. I might even mix up some honey-butter to go on it... But no pretzels. Too much work.



Jean
 
Guys(and gals),some things came up that I may have to take care of tommorrow, if I can I'll be there ,but right now it ain't looking good. If I don't make it Ron and Viv it's been a pleasure,hope you have a safe trip,and keep in touch. The rest of you guys have fun and I'll see you at the next one... Doug
 
Only thing I see thats been missed is rolls & condiments. I spent all day in bed and only went out long enough to make somekind of effort to wipe mine down. Man did I pay for that. I'll be there,not sure how long I will last though.



Sorry to see those not being able to come. **ICEMAN**,get that back all fixed up. My only word on back surgery, after having it done once myself for the same problem,is have a second opinion gathered and look your options over. If you have any questions I can answer drop me a note or feel free to call.



To the newbie ladies coming... . A word of CAUTION from those who have already been witness to this... ...

NEVER and I mean NEVER go shopping with Vivian or Denise. We all have seen how they have overloaded Ron & Larry's trucks after a shooping spree(Not only that,after a recent Powersystems show even the parts guys were glad to see them leave talk about overworking the counter help,LOL). They are as bad a influence on you as Jetpilot & Rammin On are on us,LOL.



See you all tommorrow... ... ..... Andy



P. S. -I chatted with Jetpilot tonite and he was In Fargo wishing us all a nice day and try to stay out of trouble without him. Hmmm,don't think that will be too hard. Lets see now,No Jetpilot(he's on his way to see the Canadian Power Gods),No Rammin On(he's too shop busy to leave VA along with packing),No Sled Puller(he's off to the chassis shop and more power to demolish Jetpilot later this spring),No OB1KOBI(he must have crossed to the dark side and went aol on us. Somebody summon the force so we can find him), so with that all tallied up WHO can possibly steer us along the path to trouble???... .
 
There must be something in the air... .



I won't be able to make it after all. I was really looking forward to meeting everyone, but a family obligation has come up at the last minute.



I'll keep my fingers crossed for the next one.







David
 
Back
Top