M&H Air Intake

[jclark5810]

With all the options out there for an intake on our trucks, has anybody ran this one?



M & H Inc. - Air Intakes

 

[Bob Beauchaine]

I am running Tworlines air intake which is very similar to the M&H setup pictured for 1st Gens. I am quite happy with this setup. It is a 3" system that necks down to 2. 5" from the turbo outlet. I am also running a Banks I/C and did see a drop in boost but not power. I attribute the boost drop to better air flow. I am also running W/M injection. Tims system is SS and not painted.



Bob

 

[HHhuntitall]

Haven't had one, but I think I will before long... . I like it. I'm curious what they're made of. Mild steel? Aluminized? exhaust tubing? Can they do it in SS and not paint it? I'm looking at upgrading my '93 radiator and intercooler, this would be a great addition.....

 

[RSchwarzli]

They have some neat stuff on that site.

 

[jclark5810]

I've purchased their timing advance (haven't installed that yet) and fuel pin. Very good people and great product. Here is some a picture of the twin ram in stainless, pretty sharp. The single ram is $300 plus shipping, fuel pins and the timing advance are $100. I think Eric is running the M3 pin, i have the M2 and it's very mild but is there when you get on it. The intake is kind of spendy but you're getting all new hoses plus the horn... i think. "our Polished SS Twin Ram air intake Kit. Single or Twin would come with appx. same parts.

Single would be minus the gaskets, grid delete block and bolts for grid delete block required for the Twin. Items that come with Single Ram Air intake are listed on our website. " Then you can just use a BHAF and you're good to go. It sure would look good under the hood.



#ad

 

[Fitter48093]

I'm the one that intake was buit for, It made a huge differance in EGT'S



#ad




#ad

 

[HHhuntitall]

Well, I see the upgraded turbo... . you have an upgraded intercooler, as well? And what's the cost on the twin intake? I've got a Banks twin ram in the box... . one of several I bought out on closeout several years ago..... but I like the polished SS much better.....

 

[RSchwarzli]

If you decide you want to get rid of that close out piece, lmk. I have a 1990 that could use one... .

As for the above kit, looks nice. Also would be curious to know the cost as they don't list any of that on the site.

 

[NIsaacs]

The exhaust manifold looks like a 24v??



Nick

 

[JHumphries]

How do these trucks do without the intake heater?
I would assume if it gets cold, just plugging in the block heater would help?

 

[ENafziger]

How do these trucks do without the intake heater?
I would assume if it gets cold, just plugging in the block heater would help?<!-- google_ad_section_end --> <!-- / message --><!-- BEGIN TEMPLATE: vbseo_likeshare --><!-- END TEMPLATE: vbseo_likeshare --><!-- sig -->

I may be looking at it wrong, but it looks like only 1 spacer block is provided, such that you still run the grid heater?

I'd be interested in the twin ram pricing as well.

I think Eric is running the M3 pin, i have the M2 and it's very mild but is there when you get on it.

I actually have the M2 pin as well, and it's exactly as you described. The pin and the dynamic timing spacer were both quality pieces.

--Eric

 

[Fitter48093]

Well, I see the upgraded turbo... . you have an upgraded intercooler, as well? And what's the cost on the twin intake? I've got a Banks twin ram in the box... . one of several I bought out on closeout several years ago..... but I like the polished SS much better.....

I'm running the stock intercooler for right now. I have a brand new P/S intercooler for it, but I may go with a Hillman Racing cooler.

The exhaust manifold looks like a 24v?



Nick

HTT Quick spool for a 12V, Recommended by them when I purchased the HX40 Hybrid.

How do these trucks do without the intake heater?

I would assume if it gets cold, just plugging in the block heater would help?

I live in Michigan and have had no starting issues at all. I chose to install the heater instead of one delete block. Two delete blocks are provide if you want them.



Pricing needs to come from M&H; The folks there were great to work with as this was the first stainless steel unit they've made. I'm not sure on currant price and don't want to miss quote someone.

 

[TAchterberg]

Recently inquired on a price for this, here's their response ... ... ... ... .







Kit single ram steel for 1992 to 1993 $300. 00 + shipping

Kit Twin Ram steel for 1992 to1993 $ 450. 00 + shipping

Kit Polished Stainless steel Twin ram $850. 00 + shipping sending pictures of this

These items are custom made when ordered.

After 20 years in the same location we have moved to a new shop and are

setting back up, we are still taking orders on air intakes. But turn around time will be 60 to 90 days +.

 

[RSchwarzli]

Recently inquired on a price for this, here's their response ... ... ... ... .



Kit single ram steel for 1992 to 1993 $300. 00 + shipping
Kit Twin Ram steel for 1992 to1993 $ 450. 00 + shipping
Kit Polished Stainless steel Twin ram $850. 00 + shipping sending pictures of this
These items are custom made when ordered.
After 20 years in the same location we have moved to a new shop and are
setting back up, we are still taking orders on air intakes. But turn around time will be 60 to 90 days +.

Thanks for the info! That is excellent! May have to ponder this one further!

What kind of EGT drops were noticed? And is it a single mod egt drop or did you do several items at once?

 

[Mikey-KE7LBB]

I like it!!

However, I would need just a plain aluminized one so I can paint it to match my valve covers.