Engine/Transmission (1998.5 - 2002) Map Iat

[Rockcrusher]

What size socket is required for map and IAT sensors?

They look impossible to get to, but if others have done it, I should be able too.

 

[joemyers]

13/16 deep with short extention. Go easy so as not to damage "o" ring. I used CRC carb cleaner on mine. Lube "o" ring before reinstalling. Look here for more info http://dodgeram.org/tech/dsl/sensors/IAT/clean.htm

 

[bboxall]

What size is the MAP sensor?



THANKS!

 

[joemyers]

I'm pretty sure it is also 13/16.

 

[PC12Driver]

The MAP sensor is an inch and something. 1 1/4" sounds familiar.

 

[bboxall]

IAT is 13/16" MAP is 1-1/4" Both sockets need to be deep well.