Mid-Tenn Chapter Roundtable

[Got Smoke?]

PDR 370's in sight!

Well this 'll make 'ol Wade jealous since I already have the 215 pump!



I just sold my Marine 300's today, and I'm going to order some PDR 370's as soon as I recieve the money order from the guy.



Someone posted the other day that the PDR 370's were on sale, so as soon as I saw the price I knew my 300's were gone!



I just hope that my clutch holds out for another couple of weeks till I can get my FE. Seems like she's get'n down on the low-side of life, and just ain't got the rest of the $$$ to put up for the rest of my clutch fund.



Anybody need a REALLY GOOD CB radio! I've got a severly BOMBed Uniden Grant XL I will part with for the right amount of $$ :-laf

 

[Got Smoke?]

Ok where is everybody been lately?



I've made the last two post's in here, and the Dyno thread.



What gives... ...

 

[Piston Slapper]

I am here, barely... been working on the shop, and the normal job... . and trying to open a business, too much food, not enough plate!

 

[AndyMan]

Originally posted by Piston Slapper

I am here, barely... been working on the shop, and the normal job... . and trying to open a business, too much food, not enough plate!

Quit yer *****in' and get back to work. We don't pay you network guys to surf the web!!!

 

[Got Smoke?]

Originally posted by AndyMan

Quit yer *****in' and get back to work. We don't pay you network guys to surf the web!!!

:-laf :-laf :-laf :-laf :-laf :-laf

 

[Piston Slapper]

It's called "Test and assurance" Gotta make sure "it" works

 

[WadePatton]

Cummins Cumberland today. Nice folks, got a couple of hats. Tell Jim I sent you.



Throw another log on the fire, it's gonna be nipply tonight.



Going to haul a generator back from KY tomorrow. A 4-cylinder water-cooled kubota. Anybody want to tie in to Bubba's grid? May be hauling Bubba out to TX for a truck if gets a deal worked out. I tried to steer him away from 2WD, but hey--that's just a good excuse to get a second one--in 4X4!Oo.

 

[hotram03]

Hello everyone, I hope to make one of your meetings and join if you all don't mind. Is there membership dues when joining? Thanks for any info, and thanks to Got Smoke who replied to me on my other post.

 

[Got Smoke?]

Originally posted by HotRam03

Hello everyone, I hope to make one of your meetings and join if you all don't mind. Is there membership dues when joining? Thanks for any info, and thanks to Got Smoke who replied to me on my other post.

Your welcome. No there are no membership dues as of yet because we are still getting our feet planted. Our illustrious (sp?) Pres. was so wrapped up in all the CTD jargon at the last "meeting" that he forgot to even call to order "the meeting :-laf ::ducks for cover::



Our next meeting is the March Dyno Day scheduled for March 20th right now. Unless something earth shattering comes up I will have my new South Bend 13" FE & PDR 370's installed. Also as soon as that SBC gets in there I can dust off my #10 plate that's in my toolbox @ home. Oo.



Hey newbie... ... while we're at the dyno I'll need someone to distract Wade so I can yank that #4 plate out of his 12V'r and stick in mine to dyno with :-laf

 

[Got Smoke?]

Originally posted by WadePatton

Cummins Cumberland today. Nice folks, got a couple of hats. Tell Jim I sent you.

Dangit Wade I wish I'd known you were going to Cummins. Everytime I've been down there and even twice that I've sent dad they could not find the filter screen kit that goes on the bottom side of the p7100. Maybe you can knock some sense into 'em..... last time dad said they told him the computer said they had 12 and they couldnt' find one.



Honestly that's the ONLY bad thing that I have to say about Cummins.

 

[hotram03]

Maybe I will have that Edge Duration Box installed if they get off their A$S and get it done. As for DD's next step well all in due time(hopefully very soon, I'm ready to step up LOL)

 

[MBlanks]

Hey, I'm not sure what topic this thread is on now. However, I would just like to mention that I'm a new TDR member as of this week and am right here in the Nashville area. So, if y'all are getting together again let me know.



Mark

 

[Got Smoke?]

Originally posted by MBlanks

Hey, I'm not sure what topic this thread is on now. However, I would just like to mention that I'm a new TDR member as of this week and am right here in the Nashville area. So, if y'all are getting together again let me know.



Mark

Hey sweet another 1st Gen'r. Welcome Mark. We have a guy over in Lebanon that isn't a TDR member, but closely connected through MEvins. He can probably show you a lot about your truck. He's got a 93 4x4 3/4 Ton converted to 1-ton with a NV4500 conversion as well. Its a really nice truck. Love the looks of the old square nose..... just looks mean!



Our next meeting as of right now is our Dyno Meeting March 20th in Lebanon @ Delk Performace. Come on down and join us. With all the crazy's that are gonna be there its going to be one helluva day!! :-laf

 

[WadePatton]

Anybody know Chris Knott? He sent an email, but didn't give me any other contact info or location.



--edit--

He's HotRam03.

 

[MBlanks]

Got Smoke, I'm really interested in meeting the guy that has done the NV4500 conversion, would love to do it myself. I'll have to see what I can do about March 20th, I have a fellow 1st Gen. friend that I am trying to get to join TDR and hopefully both of us can show up over there. What all is planned (I haven't had time to sort through all 19 pages of this thread)?



Mark

 

[Got Smoke?]

The March 20th date is just going to be a dyno day, as well as business meeting, and the usual BS. :-laf

 

[hotram03]

Wade: Chris Knott

1686 Mann Rd.

Lebanon, Tn 37087

Email: -- email address removed -- email and I will give you my phone sorry want post that.

 

[Crazygator]

Hello all,

I havent had time to log on to make the intro. I am in Nashville and any guys want to meet for lunch let me know. I will try to make the March meet as well. Would try to get more involved with the mid tenn chapter after meeting with you and all!



I have a 2000 2500 4x4 QC, under construction... haha



My cell # 347-3698 - Wallace or Crazygator. I have been called other things I just dont answer to them

 

[AndyMan]

Hey Wallace,



Welcome to the TDR and the Mid-Tenn Chapter! I work in Nashville as well... . along with Piston Slapper (Gap). I'd be excited about hooking up for lunch one day. Lets see what we can work out. Do you like Hot Chicken?

 

[Kimber]

Welcome Crazygator, I live in M'boro, but work in Brentwood. If y'all get together let me know... ..... I'm always ready for a break from this place.