Mid-Tenn TDR - Annual Meeting at Underwood Tire - January 28th

[sniper351]

Bring the video camera's boys.

Did you go and get a couple of extra batteries so when the 2 you have go dead, you still have some extras??? :-laf



MBFARMS, can't wait to see ya there!!!



Joe got the box put on the truck yesterday, so I might have to see my truck smoke for the first time, haven't gotten the cohunes yet to play a lot.

 

[Futures1]

Need help finding the "Flyer" for download !!

Official information thread for the January Meeting. For better or worse, it has been scheduled for January 28th in Dickson Tennessee at Joe Underwoods shop: Underwood Tire. Address, Directions, and activities are listed in the flyer you can download below.



This year will be a little bit different, as we will have give-a-ways, product "try-outs", "show-specials" on gear and tires, etc.



There will be at least one vendor on site as well. More information as it is available.

AndyManCan't seem to find where to download the flyer you mention... can you help ??

Thanks !!

 

[Piston Slapper]

It's on the front page of TDR

https://www.turbodieselregister.com/MdTDRFl121605.pdf

 

[Futures1]

Thank you Piston Slapper;



Received your message as well as the file )



BTW, I am now permanently relocated to 1445 Stokes Road in Holladay, TN. , drop by if you are ever in the area !! Have set up a small shooting range here if you (or any of the members) like to shoot !!

Even have a few pistols which you may use ). . and, I give lessons ;o)

Thanks again. . Dick S. (Futures1)

 

[99Supercab]

99supercab, ya'll outta come up 840 to 40 and caravan with us, meet up with got smoke at the hwy 109 gallatin exit, were gonna have 5-6 trucks so far maybe more but I'm not sure, thats if you want to

Lebanon is a little out of the way for us, how about meeting up with everyone somewhere on the west side of Nashville ??? Maybe somewhere around Charlotte Pike or River Road ????

 

[sniper351]

Lebanon is a little out of the way for us, how about meeting up with everyone somewhere on the west side of Nashville ??? Maybe somewhere around Charlotte Pike or River Road ????

I'm kinda on the same sheet here, if I gotta go west, I don't wanna have to drive south to get there, let's all plan a place around the west side to meet up and convoy out. Supercab, you pick a place and I'll be there...



Shay

 

[Piston Slapper]

Exit #196 I-40(Bellevue) is on the way, has a "Park and Ride" on the east bound side. It could accomodate the vehicles and have easy access back to the interstate. You got 24 miles to play on the interstate then before you get there

Lebanon is a little out of the way for us, how about meeting up with everyone somewhere on the west side of Nashville ??? Maybe somewhere around Charlotte Pike or River Road ????

 

[hotram03]

that will work, everyone meet At the 196 exit, caravan from there, exchange cell phone #'s in case somebody's running really late the rest of us can go on if thats ok with everyone?

 

[sniper351]

works for me, we gonna PM cell #'s or what? would prefer not to put them out in the open...



Shay

 

[LesStallings]

Anyone leaving out of Murfresboro besides Justin, me and my dad?

I'm going to do my best to go and can catch up with anybody going west on 840 as they pass 31A/41A (Nolensville exit). Thats about five or so miles before I-65.



Any guess when you will be flying past that point??

 

[smokindieseldork]

Joe? Your having a meeting?? ... Just kidding, I'll be there. . Thanks for holding the doors open late for me last Friday night. I appreciate it alot. I was going to drive my truck there, but I think I should just walk from Wal-Mart. . Theres going to be alot of trucks there. . Dont forget to call me Friday evening to help move stuff around so everyone will fit.....

 

[99Supercab]

that will work, everyone meet At the 196 exit, caravan from there, exchange cell phone #'s in case somebody's running really late the rest of us can go on if thats ok with everyone?

That sounds great to me, probably be easier for everyone to get together and get back on Interstate from there too. Now, next question is someone needs to pick a time to meet. 9:00 or 9:30ish ??? Is that enough time to get there by 10 ?



If anyone needs my cell #, just PM me.

 

[99Supercab]

I'm going to do my best to go and can catch up with anybody going west on 840 as they pass 31A/41A (Nolensville exit). Thats about five or so miles before I-65.



Any guess when you will be flying past that point??

Les, I beleive we`re just gonna roll straight up 24 to 440 to 40. Seems the be the straightest way for us to go. You`re more than welcome to roll with us though.

 

[Piston Slapper]

Now, next question is someone needs to pick a time to meet. 9:00 or 9:30ish ??? Is that enough time to get there by 10 ?

It'll take you approximately 25-30 minutes to get to Underwood Square Tires from I-40 Exit #196(Bellevue).



P. S. You might want to bring your folding chair this year, gonna be a full house!!



** Directions from Dickson Exit **

Exit #172 Dickson

Take right onto Hwy 46N - go 4. 7 miles till 46N deadends into US-70 W Bypass.

Turn left at US-70 W - go 0. 3 mi

Bear right onto the TN-48 N ramp - go 0. 2 mi

Bear right at TN-48 N- go 1. 7 mi

Arrive at Underwood Tire!



Underwood Tire 2202 Hwy 48N

Dickson,Tn 37055

615-446-3393



Gap's Cell: 615-948-0630



Any of you local dorks (you know who you are) are welcome to come a little early to help out

 

[Underwood Tire]

It'll take you approximately 25-30 minutes to get to Underwood Square Tires from I-40 Exit #196(Bellevue).



P. S. You might want to bring your folding chair this year, gonna be a full house!!



** Directions from Dickson Exit **

Exit #172 Dickson

Take right onto Hwy 46N

Turn left at US-70 W - go 0. 3 mi

Bear right onto the TN-48 ramp - go 0. 2 mi

Bear right at TN-48 - go 1. 7 mi

Arrive at Underwood Tire!



Underwood Tire 2202 Hwy 48N

Dickson,Tn 37055

615-446-3393



Gap's Cell: 615-948-0630



Any of you local dorks (you know who you are) are welcome to come a little early to help out

this may be a no brainer but when turn turn left on 70 make sure it is 70 bypass and not 70 business

joe

 

[Piston Slapper]

I updated the directions. 70 Business is a red light ahead of 70 Bypass. 46 N deadends into 70 W Bypass. Ms Winners will be straight ahead at the Red light to make that Left onto 70 W Bypass.

 

[Underwood Tire]

2:01 3rd Gear Launch beside shop! Oo. :-laf

2:08 tow truck into shop, repair clutch and transmission

4:30 3rd gear launch beside shop... round 2

 

[Piston Slapper]

2:08 tow truck into shop, repair clutch and transmission

4:30 3rd gear launch beside shop... round 2

Burnt rubber, gear oil and burnt clutches, *Sniff* aaaahhhhh, SWEET! I'm there Diesel Dorkus Dude!!

 

[99Supercab]

It'll take you approximately 25-30 minutes to get to Underwood Square Tires from I-40 Exit #196(Bellevue).



P. S. You might want to bring your folding chair this year, gonna be a full house!!



** Directions from Dickson Exit **

Exit #172 Dickson

Take right onto Hwy 46N - go 4. 7 miles till 46N deadends into US-70 W Bypass.

Turn left at US-70 W - go 0. 3 mi

Bear right onto the TN-48 N ramp - go 0. 2 mi

Bear right at TN-48 N- go 1. 7 mi

Arrive at Underwood Tire!



Underwood Tire 2202 Hwy 48N

Dickson,Tn 37055

615-446-3393



Gap's Cell: 615-948-0630



Any of you local dorks (you know who you are) are welcome to come a little early to help out

So we all need to meet up no later than 9:30 then ???? I`m thinkin 9:00-9:15 would be better, that way we`re all there a little early

 

[Crazygator]

Hey Joe Underwear Bra Sale,



Do we need to bring any food items or anything other than ourselves?



Let me know, you know where to contact me... ... . :-laf :-laf :-laf



See you diesel heads Saturday!