Mid-Tenn TDR - Annual Meeting at Underwood Tire - January 28th

[Piston Slapper]

I got you covered Wallace, anybody that drives as far as you do to buy tires from me i'm going to take care of.

Joe

Buy 3 square get round one free! And a Pink hat!

 

[sniper351]

I got you covered Wallace, anybody that drives as far as you do to buy tires from me i'm going to take care of.

Joe

Hey, does that cover all of us that travel for rubber???

 

[BigPapa]

Andy,



Are you going to the meeting place at Bellevue or going the back way?



Scott

 

[testraub]

Yup coming down Friday and bringing a small surprise with me for some lucky TDR member! I figured I'd plan a little better then I did last year, and avoid the trip thru WVA getting down there. I wonder... . How late do the detailing companys stay open? I'd hate to show up with as filty a truck as last year



Will have the CB on 19 so if you see me, give a shout! I'm even willing to pull off and meet anyone before Saturday. It won't have the X-mas lights on it :-laf



Tom Straub

 

[acook]

Bellevue Meeting

I'll be at the Bellevue meeting spot between 9:00 - 9:15 if no traffic or construction problems. What side of the interstate are we meeting on?

 

[AndyMan]

I'm in the running for "most excited to be there" award too! I holla!!!!

I know you's excited too. You was all giddy in my office the other day trying to put me in a good mood, but I tell you what. I've never seen anybody as excited about anything as Roy is about this meeting. I thought for a minute that we were teammates and had just won the superbowl. He got me all fired up. I need to turn him loose on Joe.



I've been in a good mood ever since. I just hope his head doesn't explode before the meeting.

 

[AndyMan]

Andy,



Are you going to the meeting place at Bellevue or going the back way?



Scott

I'll prolly hit river road and then petway. Take it into white bluff and onto dickson. I can be persuaded otherwise though. If you wanna meet up with me at the Mapco, we could roll to Bellview and meet the THUNDERING HEARD. Fast smokey trucks are fun in a convoy.



Hey Tom. Dirty or not, that truck gets better looking all the time.

 

[Got Smoke?]

Will have the CB on 19 so if you see me, give a shout!

Tom what's your CB handle and what time do you think you'll be in the Dickson area? My radio with a "lil fire in the wire" :-laf can reach good distance's... . I may try and holler you when we get close. We should be rolling in around 9AM.

 

[CUmlauf]

how long does the meeting go? i might not get there before 1 pm. that too late?

thanks

chris

 

[Got Smoke?]

how long does the meeting go? i might not get there before 1 pm. that too late?

thanks

chris

I want to say it was 7 or 8 PM before we left last year. Seems like I remember calling Terry @ 8 something while getting fuel.



Just a heads up guys I have a possible new member coming Saturday with a full set of Isspro gauges to install. Truck is a '01 6spd 2500 and he's installing EGT, Boost, & Fuel Press. Pretty sure he's got everything to install except for whatever fitting is needed to adapt to the port above the fuel filter housing. Dumb me forgot to get him to order a boost bolt while I was at it.



Anyways I talked to Hans today and he said he'd lend a hand I'm sure more than a few people will be willing too also. Just want to make sure he's taken care of.

 

[testraub]

Tom what's your CB handle and what time do you think you'll be in the Dickson area? My radio with a "lil fire in the wire" :-laf can reach good distance's... . I may try and holler you when we get close. We should be rolling in around 9AM.

Got a little "fire' myself "Tango 625" works as well as anything My old USAF Handle. I should be in the area this afternoon 91/27/06) and if I get my old backside out of bed early enought should be right near I-40 around 0845-0900.



Tom Straub

 

[Piston Slapper]

Check out this T-shirt my powerstroke buddy gave me to wear at the TDR meet.



Mr. Funny guy! And if you can't see the Emblem on the T-Shirt on the pic it's: Square Tire Square Pants.

 

[Underwood Tire]

A knife to a gun fight...

Performance Clutch came in last pm with a big GN car hauler. They have a souped-up 'Stang in it. Neat car. But... I get the feeling they have brought a knife to a gun fight, so to speak. Bringing a Ford to a Cummins event? He did however bring it in on a 12 valve Cummins pushing 700+ horses. Ran 80 mph uphill, and 70 down.



Our Powerstroke Buddy says that is how it is supposed to be. All important celebrities and dignitaries have their own drivers.



Those poor confused, misled Blue Oval Boys...



"YOU HEARD IT HERE FIRST... REPORTING LIVE FROM UNDERWOOD TIRE... THE SITE OF THE FAMOUS PISTON SLAPPER SIGHTING, I'M THE POWERSTROKE BUDDY... TYPING WHILE JOE IS IN THE CAN. "



Don't tell him.

Na-Tron Means Business

 

[BigPapa]

I gotta have one! :-laf :-laf



Scott

 

[WadePatton]

YALL





AIN'T





RIGHT!

 

[Crazygator]

Ya'll bring CD's for music, we will have jams too!



Now if all 10 of us show up it will be a crowd... ... hahaha



Until Tomorrow girls!

 

[Kimber]

Gotta stay here at work most of the night, go home for a few hours sleep, but I will get to join y'all Oo.



Sharpen your pencils Joe, I'll be lookin for some new truck socks

 

[MWilliams]

Hello, are any TDR member welcomed to attend?

 

[testraub]

Well here it is. Friday night in Dickson, TN Now to find a carwash and get some grub. If anyone wants to get together, feel free to call me.



Tom Straub

571-238-8056

 

[99Supercab]

Hello, are any TDR member welcomed to attend?

Absolutely !