Here I am

Milemarker Hydraulic - How Hard to install???

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

false cat

GM, Ford Executives Discussed Possibility of Merger

I'm getting one - on the way - how hard is it to install - I have a Buckstop Winch Bumper already - so that part is OK..... oh and if you were wondering - I've seen them work ALL Day in pulling logs from a river - I mean all day... .



Check out this site -



http://www.4x4review.com/products/accessories/mmwinch.asp



"Our first attempt to tow the broken Blazer across simply buried the Jeep in the sand. Out came the winch cable again. This was by far the most load I have ever put on a winch before as the Blazer dug a trench with the left rear tire 12" deep for 200+ feet. The weight of the vehicle and the soft nature of the sand required us to strap the Jeep to another vehicle to keep it from being pulled in toward the Blazer. It took 45 minutes of winching and repositioning the Jeep to free the Blazer from the sandpit. During this test, the Mile Marker winch never overheated, stalled, or even changed the idle speed of the Jeep, it just continued to pull! "



4-5 min straight on an electric and what happens??????
 
Last edited by a moderator:
Back
Top