Here I am

MNTDR Sat Dec 4th

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Rocky Mountain TDR Christmas Party

rocky mountain TDR X-mas party

So who is going to be wrenching on their trucks at this? Somebody must be putting in bigger injectors, and selling me their DD2s... ... Anyone? :D
 
SpicyJam said:
Sorry Billy been there done that, just go for the hose like I did, you will love them... ... ... ... ..... :-laf

Must... ... Resist... ... . Temptation... ... Actually, I think I will be very satisfied with the power the DD2s add... ... Didn't I say that about the APB too... . And the VA before that... . :-laf :{
 
Talk to the "Fat Kid", he has my DD2's in his truck and is wanting to go to the size I have. He may be willing to deal.

I know what you mean, all I wanted was a timing box and DD2's, and figured that was enough. Well a couple of Comp boxes later a clutch, that has to go away for a twin disc, a set of 8 x 10 injectors, soon twin turbos water injection and a p-pump conversion. I wonder if that will be enough? Doubt it... ... ... ... . :D hmmmmmmmmmmm NOS?



Plus I have to get Josh's turbo off my truck, that is why I need to get the twins on, 47 to 48 pounds of boost... yikes... ... I feel for Josh everytime I nail the go pedal, just remember Josh... . "you know you wanna do it". :eek:
 
Last edited:
I almost feel special that everyone is talking about me..... but not really. Will yea im geting kinda warm right now only about 1500 egt so twins are the next thing i need, are you in the market for some dd2's ? i might have some come summer unless you would like them sooner... ... let me know. MMoran i had seen your truck around rockford and delano and was sratching me head, i didnt know you were a member so i lef tthe note any way. glad you got it.



THE FAT KID

Andy
 
SpicyJam said:
just remember Josh... . "you know you wanna do it". :eek:



IF this next headgasket doesnt seal..... First I'm gonna cry :-laf Then I will proceede to take the front half of my truck appart for MAJOR surgery. I hear Shieds calling... they want my injection Pump..... Haisleys... . Oh yes... they are screaming 14mm studs, Fire rings... and a 5,000gsk... ... . Twins..... of course... . Oo. Oo. Oo.



The poor ricers may never be the same! :-laf Oo.





My poor pocket book is hiding already! :-laf



Josh
 
I am planing on going. The way it is looking right now though I might need Deon to give me a ride, or take the wifes Bimmer. My baby is broke. Its in the 911 forum and 24v engine. This is the short story, very low throttle response, sometimes surging or bucking, but it is drivable using the cruise control. Codes 236 (MAP), 522 (voltage input at oil pres sensor too low), 122 (voltage input at apps too low). New APPS in and calibrated = same problem, new Map sensor in = same problem, Edge Comp removed = same problem... . match and gas can might be my next try.



Can you tell that I am a parts guy "just throw some parts at it", not a tech. (Josh should like that)



Its thanksgiving, and I am thankfull my wife has made me stop working on the truck and get ready to eat.
 
Last edited:
Hey Randy, sorry to hear that bout your truck. Thats a bummer. Let me kow if I can help at all. Glad to give you a ride if needed. I'll get in touch with you sometime this week to see how things are going and if/how I can help.



I hope everyone is or has had a good thanksgiving day. I know I've downed more than my share of food and drink for the day and am very thankful for all that has blessed me any my family.



-Deon
 
I'm with Josh. Check your Grounds. Batteries, ECM Ground to block, et al. After that I'd be looking at your ECM communication capability. What else have you done to your truck? Give me a call if you'd like to discuss this over the phone.
 
TurboTweaker said:
I almost feel special that everyone is talking about me..... but not really. Will yea im geting kinda warm right now only about 1500 egt so twins are the next thing i need, are you in the market for some dd2's ? i might have some come summer unless you would like them sooner... ... let me know. MMoran i had seen your truck around rockford and delano and was sratching me head, i didnt know you were a member so i lef tthe note any way. glad you got it.



THE FAT KID

Andy



You are as special as you feel!



I was just thinking that if anyone was trading up, they might want to trade out too. DD2's are the size I would like to go to, but I am not in that big of a rush. Just seeing what's out there... ...
 
TurboTweaker said:
will,

if you want them they are your's. i just have to find some bigger one's to fill the holes, bummer huh? :D Oo. :D



The Fat Kid

Andy



We'll have to talk a bit more on Saturday. I really would hate pressuring you into bigger injectors though... ... :-laf
 
Back
Top