Mopar EGR cleaning solution dilution

[cricha]

Going to clean my EGR cooler and valve. The Mopar cleaning solution says it must be diluted and refer to the bulletin for the proper dilution. I dont have the bulletin, and it isnt listed on the procedure that comes with the Geno's cleaning kit. Can anyone share this info with me? THANKS!!

 

[Topzide]

Use Purple Power and you'll be fine. This is what I used with great success!

 

[sag2]

The Mopar is essentially dish soap.
11. Completely submerge valve housing using a mixture of hot tap water and MOPAR® EGR System Cleaner (ESC). Mix cleaning solution 1 part ESC and 4 parts water. Allow the valve to soak in the cleaning solution for 1 hour, and occasionally agitating the shaft or moving it up and down through its full stroke.
12. Remove the valve assembly from cleaning solution. Completely remove remaining soot from shaft assembly (1), poppets (2), seats (3), and between the lower soot guard (4) and upper soot guard (5) using the wire bristle brushes.

 

[cricha]

ended up using Purple Power full strength. Worked excellent.