Here I am

Mopar Fuel Filter Rip-Off

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Another paint question

Cat Kill

Status
Not open for further replies.
I went the my 5 Star dealer parts department this afternoon for fuel filter. $47. 50!!!
You have got to be kidding. I told Mike(the parts guy)that Pro Fleet on Hwy 99 in Elk Grove changed my oil(11 qts Dello 400), oil filter, fuel filter, checked my transmission fluid, added air to my tires,and lubed by front end for only $80. 00 total. The parts guy said my fuel filter must not have been a 'quality' filter. I told him that they installed both oil and fuel filters from Baldwin. He said they are pretty good. Anyway, I didn't buy MOPAR's fuel filter. Maybe Brandon can find a cheaper but good one and change mine in Modesto tomorrow at his service station.

------------------
Rob in Sacramento
Y2K All Black 3500 ISB 4x4 4:10 LSD,Auto,QC,SLT Laramie, LB, Polished Stull Billet Grill & Fog inserts, Chrome Smitty Built Step Rails, Mopar Chrome-Tipped Mud Flaps, A-Pillar mounted Turbo/Pyro/Trans Temp gauges,21-20-99 & 18-24-99 Computer Re-Flash,Weatherguard 'Weekender' Ladder-rack,Rancho 9000's(the best upgrade I've done so far),Diamond Plated Tool Box, OEM U. R. Bedliner.
I plan to 'BOMB' only after my 100k mile warranty expires ;)Fact:"The First Fords' had 'DODGE' Engines-The Last Fords' NEED THEM!"
 
Rob,

Run over to W. Sac to Cummins West and get the correct Fleetguard for a LOT less than that!

------------------
Joe George
Eureka, CA

'95 2500 CC auto 4X4,3. 54,Combo EGT/boost guage,custom switch panel,PacBrake,TST #5,BD valve body,Automatic motorhome steps on both sides,Foldacover hard bed cover,Cummins chrome kit,Black steel grill guard,Front hitch receiver
 
#ad
DON'T get 'em from D/C, just get a Fleetguard (the best stock filter canister filter option available IMO).

<font color = red> <font size = 4> FS1268 </font color = red> </font size = 4> is the PN to ask for. Cost ya about $13 or $14 smackers and you can get 'em from Geno's Garage if you can't find them locally.

Vaughn
 
watch your numbers vaughn there is already a upgrade to the fs1268 ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .....


more to follow i have a case of them at work the o-ring is upgraded for the fuel filter lid tightening impaired

it is a fs 19579 ... ... ... ... ... .

personally i think the mopar box is pretty tight... ... . but the fleetgaurd box will do with a good price we can supply them to you sat if you want robby


[This message has been edited by Brandon (edited 12-09-2000). ]
 
I just changed my oil and fuel filter on my '00 Ram last night at work. On my lunch break,I ran down to Cummins NW and paid 5. 34 for the Fleetguard oil filter and 15. 78 for the Fleetguard fuel filter.
I always buy factory brand filters for all my cars,but I never buy them from the car dealers themselves.

-Mike



[This message has been edited by MikeR (edited 12-09-2000). ]
 
RE fuel filter rip

Folks, I just paid 30 something for a thermostat at a 5* because I couldn't find a quick match. Can you say "serious GOUGE?"



------------------
Mark Wardell
1996 Dodge 3500, 4x4, Duel, Green and silver.
 
I went to NAPA and bought their Gold fuel filter and it has Stratophore (sp?) on it. I think was about 8 10 bucks

Tom
 
Originally posted by N8LHG:
RE fuel filter rip

Folks, I just paid 30 something for a thermostat at a 5* because I couldn't find a quick match. Can you say "serious GOUGE?"


I got my t-stat at a Cummins authorized dealer for 20. 25 last week. Check the Cummins site(www.cummins.com)and see if there is an authorized dealer near you. You would be suprised to see who can get Cummins stuff for you. There's 4 in my area alone. Two are heavy truck dealers and two are diesel repair companies.



------------------
Curtis Harris

"JAWS"(The Great White)
Updated 11/19/00
1997 Club Cab Dualie
correctly valved 5 speed. White, Brown Manf. brushguard and rear bumper,Sprayed in liner, Stock plate and AFC properly adjusted. That's all for now. More to come.
 
I found Wix fuel filters for $10. 50 on the flip side, Mopar oil filters are $7.


------------------
Y2K 2500 QC Sport 4x4 LWB
72 Dart 340
89 LeBaron GTC 2. 2 TI
 
I guess just because it says Mopar they think they can charge double what Fleetguard does. After all it is a Fleetguard filter just painted mopar color with there number on it. I bought one once when I was out of filters but no more. I stock up on oil and fuel filters,

------------------
2000 Dodge 4x4 Quad Cab SWB 5-SP
 
There outta be a law!!!! I went to Lithia Dodge in Medford OR to get a fuse. One of the square ones. The fuse for my trailer wiring fried. They wanted $4. 95!! I thought the guy was pulling my leg!! He was serious. What's a guy to do? They have the only game in town.

As I was ploping down my hard earned cash, a fella behind me comes in with a fractured taillight lens asking if they have it in stock. The other clerk quickly says "$79. 95 for the assembly. " Setting his jaw with his chin up, squinting down his nose, he leaned forward slightly, awaiting the old guys reaction... .

The guy says "I only wanted the lens. How much for the lens without the assembly?"

"$79. 95. It only comes WITH the assembly" was his reply and he crossed his arms across his chest and smugly stared at the guy, almost challenging him to argue.

By this time the other clerk had completed my fleecing and I wanted to get out, but was distracted by the drama to my left. I wanted to come to the old guy's aid, but I was rather shocked by the parts guy's challenging demenor. He was looking for a fight! He wanted to argue about the price and I just knew he wanted to say the age old parts counter line, "Well do you want it or not?"

I am ashamed to admit that I bailed out and left the guy to fend for himself, but it wasn't as if he really needed me. In a calm voice I heard him say as I went out the door, "Well, I guess I'll just tape some red celophane over the hole... . You can keep your assembly!"

Why in the hell do dealer's screw us so on parts????? It seems so short sighted. I expect someone to make a profit, but they GOUGE! #ad
Deeply!! Hail to Geno's, Hail to Brandon, and Hail to Cummins!!

------------------
2001. 5 2500 SLT+, QC/LB 4x4, ETH, 6spd, 3:54 LSD, camper/tow equip. , NV241HD, Bright Silver, Snug Top, Ispro w/3 pod pillar w/tweeter, Pyro, Boost & Mag Hytec cover w/temp guage, no decals and no emblems.
 
This seems to be the common approach at DC dealers. This past summer I was prepping to go to a Jeep Jamboree and found that the boot on my front driveshaft was torn off. Three different dealers told me that the only way I could get a boot was to purchase the entire driveshaft! Went to a speedshop, picked up a Rancho shock boot for $4. 95 and used it instead. Its still in place and holding just fine.
Originally posted by Davison:
There outta be a law!!!! I went to

As I was ploping down my hard earned cash, a fella behind me comes in with a fractured taillight lens asking if they have it in stock. The other clerk quickly says "$79. 95 for the assembly. " Setting his jaw with his chin up, squinting down his nose, he leaned forward slightly, awaiting the old guys reaction... .

The guy says "I only wanted the lens. How much for the lens without the assembly?"

"$79. 95. It only comes WITH the assembly" was his reply and he crossed his arms across his chest and smugly stared at the guy, almost challenging him to argue.

 
Hello, Geno's Garage online! can buy individual or a bunch, and even with shipping real resonable for the fleetguard oil and fuel filters. just a couple of mouse clicks away don't have to ride around looking for what you need.

------------------
1999 3500 quad cab, auto aero fendor trim and running boards,
bugflector II, K&N filter, Geno's monster tip
 
I paid the $31. 75 for the Mopar Fuel Filter and another $9. 79 for the Mopar Oil Filter because these so Cummins shops in my area doesn't stock either item--but next time I am going to have them order them for me. No problems draining/change fuel filter--except the o-ring needed lubed up a bunch so it would slide around while tightning up the cap. 7500 on truck-second oil change-first fuel filter change--original filter was perfect to look at.

------------------
Y2K 3500 4x4 SLT+ Leather Auto 4. 10 Black
'64 Plymouth 426 III
'79 Chrysler 300 T-Tops
 
If you folks realy want sticker shock on a fuel filter you need to call the brand new dealership in Wilsonville, OR (Town-n-Country Dodge) - I think they wanted me to pay for the service equipment that was sitting idle in the repair bay

Are ya sitting down? - $56. 94. All I could do was laugh out loud and tell the counter person to keep it and I would order 3 from the Baldwin distributor for that cost.
 
Wix has a once a year 75% off sale usually in the spring for one week. I buy enough filters to get all my rigs though the year. Cost for a Cummins fuel filter,you better sit down,$3. 50

------------------
95' 25004X4,AT,Driftwood,Banks Stinger,Warn fender flairs and running boards(Play truck)95 3500,5 speed,Driftwood,Banks&Phscotty,34,000 GCVW apple and tractor hauler(work truck)
 
Originally posted by illflem:
Wix has a once a year 75% off sale usually in the spring

Now that sounds GOOD!! #ad
Do you know when it will be next spring? If not, maybe you could share the info if you get it??? I'd like to get in on that action!



------------------
2001. 5 2500 SLT+, QC/LB 4x4, ETH, 6spd, 3:54 LSD, camper/tow equip. , NV241HD, Bright Silver, Snug Top, Ispro w/3 pod pillar w/tweeter, Pyro, Boost & Mag Hytec cover w/temp guage, "Plain Wrap" (no decals or emblems)
 
I sure will!The way it works is that most all the auto parts that carry Wix filters won't have all the filters you need,as long as you get a list of the filters you want to them before the sale they will order them in and write up the invoice during the sale period. There hasn't been one filter ever for me that Wix couldn't match,I have a strong feeling that Wix makes a lot of the OEM filters and puts other names on them.

------------------
95' 25004X4,AT,Driftwood,Banks Stinger,Warn fender flairs and running boards(Play truck)95 3500,5 speed,Driftwood,Banks&Phscotty,34,000 GCVW apple and tractor hauler(work truck)
 
Originally posted by Davison:
There outta be a law!!!! I went to Lithia Dodge in Medford OR to get a fuse. One of the square ones. The fuse for my trailer wiring fried. They wanted $4. 95!! I thought the guy was pulling my leg!! He was serious. What's a guy to do? They have the only game in town.

As I was ploping down my hard earned cash, a fella behind me comes in with a fractured taillight lens asking if they have it in stock. The other clerk quickly says "$79. 95 for the assembly. " Setting his jaw with his chin up, squinting down his nose, he leaned forward slightly, awaiting the old guys reaction... .

The guy says "I only wanted the lens. How much for the lens without the assembly?"

"$79. 95. It only comes WITH the assembly" was his reply and he crossed his arms across his chest and smugly stared at the guy, almost challenging him to argue.

By this time the other clerk had completed my fleecing and I wanted to get out, but was distracted by the drama to my left. I wanted to come to the old guy's aid, but I was rather shocked by the parts guy's challenging demenor. He was looking for a fight! He wanted to argue about the price and I just knew he wanted to say the age old parts counter line, "Well do you want it or not?"

I am ashamed to admit that I bailed out and left the guy to fend for himself, but it wasn't as if he really needed me. In a calm voice I heard him say as I went out the door, "Well, I guess I'll just tape some red celophane over the hole... . You can keep your assembly!"

Why in the hell do dealer's screw us so on parts????? It seems so short sighted. I expect someone to make a profit, but they GOUGE! #ad
Deeply!! Hail to Geno's, Hail to Brandon, and Hail to Cummins!!


Davison,

This is why I always have negitve things to say about my dealer... ... ... ..... Because my dealer is the one you said in Medford!! LITHIA YUCK! These guys have lost 3 trucks sales to me as well they just dont get it... . If I can drive 3 hours and save 5k on a truck for the exact same truck do they really think im going to still buy off them? Do you think they would come down to match the price? Hell no. I gave them 3 chances... This is my 3rd cummins. I just pray i have nothing go wrong for warranty. Im at 14k from August so another 6-9 month ill be off warranty. Sorry for rambleing I still get pi$$ed when i think about it.
Sky

------------------
2001 QuadCab,SWB,Auto, 4X4,4" Flowmaster Exhaust, Bosch 275 Injectors, K&N... ... ... .
 
Status
Not open for further replies.
Back
Top