2nd Gen Non-Engine/Transmission Mopar Ram Dualie Mud Flap

[ntillm01]

For those browsing for ideas of what mud flaps the want for the rear of their dualie, I thought I'd post pics of the Mopar Accessories ones I put on. One hint: throw the push-pins that come with them in the drawer. They won't work. I got 10 of the same torx-head screws that hold the wheel liner in and used those instead, backed up with 8X1. 0 mm nuts.

 

[ntillm01]

Sorry, my Kodak picture disk won't knock em down to 33 K. It's either thumbnail, or 38 K, and that won't work.

 

[ntillm01]

Inside view

I had to use 8X1. 0 mm 30 mm long hex head screws for the inner two holes. Factory bolts and 7/16 worth of rubber don't go together in those places.

 

[ntillm01]

Side view. Tuck up next to the wheel opening nicely.

 

[mjs]

i had seen a set of dully mud gards that were moulded made by husky linner i bought a set of single wheel gaurds and they seem to kick @$$ this is worth checking out

 

[mjs]

oh yeah good job and advice i'm not trying to cut yours up. but i thought this would be good for others to look in to . i think you might like these to