Archived Need 370 install instructions, hurry!

[EBottema]

Hey guys, installing my 370's right now, anyone have a quick link to the how to install um. . Thanks



I cant find it while searching!



Erik

 

[Deezul1]

At the risk of sounding like a SA, undo the lines, pullem out, putem back, put the lines back on. What did you need to know? give us an idea of what you dont understand. Its pretty easy to do, no complicated stuff to deal with. Just have to bleed the lines a little to get the air out so it will start.

 

[Joe G.]

You should have got instructions with the injectors. Pulling them out is the only hard part, but a little patience will take care of that. You don't even have to bleed the lines. A 12 valve will eventually start with air in the lines. Quite a bit of rock and roll until it smooths out after it starts.

 

[EBottema]

Thanks guys-



Install was pretty easy, it runs much more smooth than with the stock injectors. The engine sounds slightly different too. Is that normal. I'm still running the stock fuel plate and gauges will be going in next week. Should I worry about EGT's right now, if im only doing highway driving?



Erik