Need help w/sensors

[hadi]

Hello every one, I am doing another retrofit, only this time I am going to try and wire it up to the OEM wiring harness. Can someone tell me how to visually locate the following:
a) engine speed sensor
b) crank angle sensor
I see there designation on the wiring schematics Identifying them on the block is another story. If you know where they are please advise.
thanks

H

------------------
98 AMG Hummer,repowered with 99 24v 5. 9L Cummins,4" exhaust,Trorque-pro propane charged, 17"2 piece wheels,37"good-years ATS

 

[HEMI®Dart]

Hadi,

I got this info from Fritzs' Web page:


I think both sensors you are talking about are # 10. "It provides crankshaft speed and position data. The crank sensor is mounted behind the starter".

#ad


Fuel System Components - 24-valve Cummins Turbo Diesel engine.

1. Fuel Transfer (Lift) Pump
2. Fuel Return Line (to Fuel Tank)
3. Fuel Supply Line (Low Pressure, to Engine)
4. Fuel Heater
5. Water-in-Fuel (WIF) Sensor
6. Fuel FilterlWater Separator
7. IA T Sensor
8. Map (Boost) Sensor
9. Fuel Drain Manifold
10. CKP Sensor
11. CMP Sensor
12. Overflow Valve
13. Drain Valve
14. Fuel Pressure Test Potts
15. ECM
16. ECT Sensor
17. Fuel Injection Pump
18. Throttle Lever Bell Crank and Apps
19, High-Pressure Fuel Lines
20. Fuel Injectors
21. Fuel Heater Temperature Sensor (Thermostat)
22. Oil Pressure Sensor
23. Fuel Injector Connector
24. Drain Tube
25. Intake Manifold Air Heater/Elements

More info: http://dodgeram.org/tech/dsl/mt_2_feb98/lower_end.htm

[This message has been edited by HEMI®Dart (edited 04-21-2001). ]