Need help with speed control

[CPH]

My speed control stopped working yesterday. I went to work it was fine. I left work and it did not engage. Green led on switch lites. It will not accelerate using the exel. button. The flow chart in the manual says check fuse as second step. I couldn't find a speed control fuse. I have vacuum from pump. I haven't taken the battery out to see if I have a broken line yet. Any advice before I get into this? Thanks in advance



Charlie

 

[illflem]

The vacuum line to the actuator under the driver's side battery is often the problem. Check it and the rest of your vacuum system for leaks/disconnects.

 

[CPH]

Spped Control

Score another one for ILLFLEM! I pulled the battery box and checked the plastic hard vacuum line to the speed control servo. Nice sized hole in in. I cut the line, it had plenty of slack, and re attached. Speed control is back in action! Thanks again ILLFLEM!



cph