Here I am

Archived Need Injection Pump and Install in Idaho..

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Archived 1690 code, Limp mode, 1999 Model, Help!!

Archived Fluid leak, Booster and Brakes

Status
Not open for further replies.
I am posting this for my Father (Jack in Alaska). He is in Cadwell ID and his injection pump is going South fast. The truck will not start the first time when hot. It usually starts on the second or third try and he is starting to worry. He has been to two Dodge dealers along the way. The first replaced his lift pump (with the new in the tank pump) and sent him on his way, the second said there where no codes and that they would not replace the pump unless there where codes. He is out of warranty and this is on him so I am trying to find him a good shop in ID or South of there to get his truck worked on.

I told him to call Industrial Injection in Salt Lake City to get a new pump but he will need to get it installed. He is headded to Casa Grand Arizona.



Does any one know of a good shop between Idaho and Arizona to get the pump installed?? or a better place to get a pump.



Thanks,



JR2
 
john



give me a calll at 208 739-2520 and ill hooook your dad up with a tdr member near caldwell who has done a few of these. also get him set up w/ a pump. if no answer leave mess ill call back
 
Expect a call from my Dad shortly. I just talked to him on his cell phone and delivered the message.



Thanks for the help.
 
Well my Dad drove on to Salt Lake and made a stop at Industrial Injection. After arriving at 4 pm on Friday they took the time to look at his truck and then went ahead and installed a new VP44. Dad has now made his way into Arizona and is have no problems.
 
Status
Not open for further replies.
Back
Top