Engine/Transmission (1994 - 1998) Need speed sensor gap! HELP

[moparnut-indiana]

Hey guys, haven't posted many times but I read this thing everyday knowing that someday I'll need some help.

I tabbed my killer dowel pin yesterday but I didn't know what gap to set the crank sensor at so I guessed.

Now my tach is erratic and my trans won't go into overdrive. If anyone can give me that measurement I would greatly appreciate it!

THANKS

Paul

 

[illflem]

A credit card works for me

 

[crabman]

Sensor-to-vibration damper air gap is : 1. 25MM (. 049 in. ) minimium to 1. 30MM (. 051 in. ) maximum.

A brass feeler gauge should be used too. (non-magnetic)

Be sure the sensor is not near either of the notches on the v/b.

Tighten to 18 ft. lb.

 

[moparnut-indiana]

Thanks, I knew you guys would know!

This site has saved me thousands of dollars (or has it cost me thousands of dollars?).