Here I am

need stainless exhaust for 2010 3500 srw, 6.5 bed mega cab

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

10 year coolant?

wheel weights

Status
Not open for further replies.
any input as what to get? The one on genos shows no muffler. Any effect on engine, warranty or throwing codes? My current exhaust is flaking and i can see a hole popping up any time now...
 
I had to get a new DPF back system. My factory sytem came apart (rust) on the upper bend near the spare. I went with the magnaflow system with the muffler. I didn't want to chance getting a droning sound. No difference in sound whats so ever (no codes). Dodge replaced my front axle joints and the exhaust didn't concern them. Besides the factory exhaust didn't last four years and wasn't covered by warranty. I got upset when they new stainless system turned golden, I thought it had over heated. But got the Eagle one Chrome wheel cleaner (as recommended by magna flow). It cleaned right up (It's the waxes that are used to polish the stainless).
http://www.amazon.com/Magnaflow-169...id=1392424763&sr=1-2&keywords=MagnaFlow+16970
 
Last edited:
thanks. does that part number fit the SRW 3500 megacab? Please advise as the parts slector on amazon lists cab and chassis and crew cabs but not specifically reference the mega. in addition the kit supplies both a straight pipe and a muffler, you choose. looks like a pretty good deal.
 
I went to magnaflow's web site and it looks like the same kit for your truck as well.... If your going to do it yourself the small section of pipe between the old muffler and the DPF stays. I accidentally cut that piece off only to realize that it was supposed to stay. I had to use the muffler delete section to make up for the piece I cut out. It was a pita to cut off the hanger brackets and cut it down to size.
http://www.magnaflow.com/diesel/stainless.asp?make=DODGE&catalog=FEDERAL
 
Status
Not open for further replies.
Back
Top