2nd Gen Non-Engine/Transmission Need to crank and not start

[PMelton]

I need to flush my p/s system and read somewhere there is a way to disable the engine from starting, but still be able to crank it over. I thought it was related to pulling a fuse but I can't be sure. Anyone familiar with this ?

 

[kenny61]

you need to keep the fuel solenoid from opening. This is a 12v right? You can do it by pulling fuse, relay, or connector at solenoid. I'm not sure where fuses or relay are located so I would just disconnect solenoid wires

 

[PMelton]

you need to keep the fuel solenoid from opening. This is a 12v right? You can do it by pulling fuse, relay, or connector at solenoid. I'm not sure where fuses or relay are located so I would just disconnect solenoid wires

No, this is a '02 24v.

 

[kenny61]

Try posting in the 24 valve section if you dont get an answer. Sorry I cant help

 

[PMelton]

Ok, thanks.