Need to see pics of 3 guage A piller pod

[Tee]

I can't decide wheather to get the dash pod like "NavyDood" or the A pillar. Leaning towards A pillar but need to see pics...



Don't use the grab handle so its not a concern.

 

[Diesel Manor]

Hi Tee,

Scroll down to the bottom of the this page:

Gauge pictures



It has some pictures of the color/grain matched Autometer pillar with the OE matched ISSPROs. If you have any questions feel free to give us a call.

 

[MacHaggis]

Looking at the overhead mount, I can't tell . . . Are the gauge faces canted a little toward the driver or do they face straight back??

 

[Matt400]

Looking at the overhead mount, I can't tell . . . Are the gauge faces canted a little toward the driver or do they face straight back??

They face the driver, and the angle is actually better IMO than the SRT-10 A Pillar if you are using an LCD gauge like the SPA. I have used both.

 

[MacHaggis]

Thanks, Matt.

 

[Smithk136]

Tee, I just put the Isspro white face gauges on the A pillar ( the same ones that diesel manor has in his web site). I would not want them in any other pod. FYI For myself the middle gauge is the easiest to see with the bottom one next. I kinda have to look up to see the top gauge.

 

[Matt400]

Thanks, Matt.

Most welcome, here is a pic of that overhead showing the angle. I was setting in the drivers seat and just turned my head as if to look at the gauges when I took this shot.

#ad

 

[Tee]

Thanks guys, just what I needed to see.

Going on a road trip to Vegas in the morning (going to the AC Delco Nationals - NHRA - time to smell the nitro!!!!!! ). Will spend alot of time visualizing/checking where I think the guages would be most easily viewed while driving.

Thanks again ---- T