Need tool #6840

[Archive]

I am installing 370 injectors and delivery valves soon. Where can I get the #6840 Miller tool for removing/installing deliver valves and the #7471B baring tool?



------------------
1995 4X4 std cab 12 valve, original owner, 100k miles, 14cm turbo, 4" exhaust, EGT and Boost guage, #5 torque, 215 injectors, AFC spring kit, Pscotty airfilter, Dunrite TC and Transbuddy shift kit soon, 3. 54 rear, 17. 5" American Racing aluminum wheels, Mickey Thompson MTX's, Rancho's 9000's Helwig sway, Starcraft camper and assundry dodad's. Only thing faster than a 12 valve is my Ducati 4 valve

 

[Archive]

Snap-On sells the tool as part of the B&C series service kit. If I remember correctly, there are a couple of different kits, so verify that the tool is in the kit you want. I think they can get it separately too.

------------------
520 Rear Wheel H. P. and locomotive level torque = 15. 5 sec @ 97 mph with the rear wheels spinning in 5th gear going through the traps in the quarter mile. No slicks here, pal, no fancy auto transmission, just the truck in full street trim, 7400 lbs. of Auto Wurks Diesel/BD Performance raging, fire-breathing DIESEL POWER

 

[Archive]

I know you can get most of these type tools through Miller Special Tools. They carry the service tools for Daimler/Chyrsler & Jeep.

pn: 7471 includes 6840, 6842, 6843a, 6862, 7471b & special dial indicator (1994-Current).

------------------
4-sale or Trade
'99, 3/4, QC, SLT, 4x4, ISB, 5sp, 3. 5xlsd, tow pac, HD tcase, tow mirrors, camper pac, White over driftwood, Mist gray interior. With less than 19,500 miles.

Martin Allen Bursell (posted per guidlines)
TDR# 25d286 (posted so they can cancel my subscription easier/faster)

 

[Archive]

A-BOMB,

I got the barring tool from Cummins, part # 3824591. Can't remember the price, think it was around $30. Snap-On Tool part #YA9565. Snap-On also sells the fuel delivery valve tool you want. It is part # SP503 Spline Socket. Or they also sell a timing gause set which includes the dial indicator and holder, gear puller, and the spline socket (part # SP500 Diesel Timing Gauge Set). Don't know the prices for the Snap-on tools.

From what I see in the Snap-On tool catalog the Dodge/Cummins Service Set (part # 2017DSP or 2017DSPLT) I do not see a listing for the spline socket. Looks like the kit includes the barring tool & dial indicator (part #YA8331, Timing Indicator Tool), so it seems strange the kit would not have the spline socket. Might ckeck with a Snap-On dealer about that.

 

[Archive]

Thanks all for PN info,

I went to miller web site and they sell a complete timing package which included baring tool (#6840). I could not find individual numbers for the spline socket and baring tool. I then went to snap on site (www.snapon.com). Snap-on sells the Baring tool P/N YA965 , Spline Socket P/N SP503 , and Snap on timing kit P/N SP500, which did not include baring tool. Local Cummins dealer had baring tool for half price of snap on, but no other tools for project.

Hope this helps others doing the same job.




[This message has been edited by A-bomb (edited 10-31-2000). ]

 

[Archive]

A-Bomb,

I just got the Miller delivery valve socket today. Its P# 6840. It can be purchased seperately from the timing Kit. You`ll need to call them. Cost about $45 w/s&h. #ad




[This message has been edited by HEMI®Dart (edited 10-31-2000). ]