Need torque specs asap...

[zman]

Hey guys,



I'm all set to install my DTT torque converter tomorrow, but I just realized that I don't have any torque specs. Guess I should probably order a shop manual.



I need the following torque info:



main transmission bolts

TC bolts

crossmember to frame bolts

transmission mount bolts

anything else I missed



Thanks in advance!



Steve

 

[Steve St.Laurent]

Here ya go (Since I know NOTHING about autos, this is their list from the end of the 47re section, let me know if you need others)



TC Bolts = 35 ft/lbs

Bolt/nut, crossmember = 50 ft/lbs

bolt, driveplate to crankshaft = 55 ft/lbs

Plug, front band reaction = 13 ft/lbs

Locknut, front band adj = 25 ft/lbs

switch, park/neutral = 25 ft/lbs

Bolt, fluid pan = 13 ft/lbs

Bolt, oil pump = 15 ft/lbs

Bolt, overruning clutch cam = 13 ft/lbs

Bolt, O/D to trans = 25 ft/lbs

Bolt, O/D piston retainer = 13 ft/lbs

Plug, pressure test port = 10 ft/lbs

Bolt, reaction shaft support = 15 ft/lbs

Locknut, rear band = 30 ft/lbs

Bolt, speedometer adapter = 8 ft/lbs

Screw, fluid filter = 35 in/lbs

Bolt, valve body to case = 100 in/lbs

 

[zman]

Thanks Steve! That's twice now. I owe ya!



Only thing I didn't see was main transmission bolts to engine. Any one have that one?? Thanks!



Steve