New Core support mounts

[DThibault]

I'm putting the core support back in for my 91 and the rubber mounts are compressed and hard. The dealer says they are no longer available and I haven't found any online yet. Does anyone have a source for these? Thanks

 

[GHarman]

Core Support mounts?

Are you referring to the radiator? GregH

 

[DThibault]

Well, the radiator support that goes all across the nose of the truck. Where that piece bolts to the frame cross member there are two bolts with rubber molded to them. The upper bolt piece is egg shaped so that you don't need to hold a wrench on them because they are not visible. I could slice some of the lower donuts from some body mounts and that would take up the space, I was just looking for some new ones that were maybe a little softer.

 

[B.G. Smith]

YOu should be able to find something that will work in J C Whitney catalogue. If there is a speed shop in your are, they also might have something you coul;d use. bg Radiator support bushings - Shop sales, stores & prices at TheFind.com

 

[Paychk]

these might have what your looking for:



http://www.dodgeconnection.com/DodgeConnectionHome.html



Lots of OEM stuff for 1st gens.



DODGE TRUCK PARTS & ACCESSORIES





Some pics of the new ones in case you want to fab your own.



https://www.turbodieselregister.com...15-let-resurrection-commence.html#post1110851

 

[DVolk]

Welcome to Poly Bushings.com can probally make up some if he has a sample

 

[JMDancoe]

When my brother and I did my 86 / 92 Retrofit and his 2WD to 4WD, we replaced the egg shaped upper metal plates with round washers and stacked round rubber pads and washers to the same thickness as original. Only reason we could see for the egg shaped ones would be assembly line speed location for alignment of front end sheet metal. Round rubber or poly pads are not hard to find.