no 2-3 shift at WOT-any ideas?

[Seaner]

I now have a billet input shaft in my transmission, as I broke the stock one 2 weeks ago. (should have put in billet to start with) transmission is all fresh again, but I can't get my 2-3 shift at WOT. It started doing this a couple of months before breaking, in fact, the shaft broke on 2-3 shift as I lifted from the floor. transmission shop sent me to dealer to do reflash TSB 18-003-06, which I did, but still same, no 2-3 shift at WOT, it just keeps reving til I lift. Anybody have same issue or ideas on a fix?

 

[JustaSix26]

I had the same Prob after my transmission build. some times it even droped to 2 under wot and stayed their. Turned out to be my shifter lead was hung up under the dash easy fix i could make it drive fine by putting it in drive and pushing up on the shifter tell it was tight. hope thats all it is for you easy to miss when every thing goes back in.

 

[Seaner]

I had the same Prob after my transmission build. some times it even droped to 2 under wot and stayed their. Turned out to be my shifter lead was hung up under the dash easy fix i could make it drive fine by putting it in drive and pushing up on the shifter tell it was tight. hope thats all it is for you easy to miss when every thing goes back in.

thanks for the feedback, I will check into that. Do you have to push on shifter everytime to get it to shift right?