No Box, Just tubo and injectors...?

[GWBourne]

anyone running like this? id like to keep the truck as simple as possible. i was thinking of some 100hp injectors and a larger turbo with a BHAF nad a 5 inch stack with 5 inch exhaust off the turbo...

ANY input would be GREAT. i think i might have to go to an aftermarket fuel pump as well... . RASP would be my choice, but FAST isnt out of the question.



here is what i will be doing with the truck, TOWING! 20k isnt out of the question. also the turbo would have to be something i can use with my Jake E-Brake.

thanks

grant

 

[tobaccogrower]

i've been running around with just the edm injectors and sps64 turbo, no chip. truck goes good. havn't towed with it. you will need some sort of boost fooler. a big turbo will set overboost codes!... . james

 

[GWBourne]

is there anything that JUST fools the computer on the boost side of the house? i was also thinking roktech crank sensor... .

thanks.

Grant

 

[Morse]

My PS62 came with a boost fooler. . Just a simple little thing that plugs in. I think a 62 and a set of injectors would be a great combination. . Then if you ever got the urge, it's there. .

 

[GWBourne]

ehh, im new to all of the turbo names... what is a PS62? i am guessing 62 CM wheel... i dunno, maybe way off there. im a drivetrain and suspension guy... not a motor guy... . can turn the wrench, but dont like to find the parts too offten.

Grant

 

[mattymac]

www.industrialinjection.com



for the turbos, 62 means how many mm's your compressor wheel is. If you are towing dont go with a 66, a SPS62 (super phat shaft) may still run hot towing 20k with 100+ HP Also an exhaust brake will work with either. do the crank sensor mod, and a FASS or RASP would work awesome!



Morse, the fooler your speeking of is a wastegate fooler not a boost fooler.



GW, you should be able to get a BOOST FOOLER for your MAP sensor wherever you get your injectors.

 

[Morse]

I've never had a problem with any codes being thrown. Maybe the power puck had something to do with it. Don't know. .

 

[Joseph Donnelly]

Installing injectors isn't as easy as on second gen trucks. A box is a lot easier to install. However, they work. One good combination is the Diesel Dynamics stuff I chose back in Oct 2003: Stage 2 injectors, pusher pump, DD turbo. Now, I am running the DD/Edge BB turbo which is a lot more durable than the others I have used in the past. By the way, the EZ box works great with injectors. Either gave me 65 hp, both together, 165 hp.

 

[tobaccogrower]

boost fooler

i too have the boost fooler from industrial injection. it will fool the truck for a little boost. if you tow and hold it say at 35# boost for more then 15 seconds, you will get a overboost code. you will need some sort of performance box that fools boost. good luck... . james.