Attention: TDR Forum Junkies Well, my FASS just stopped working this evening - noticed it on a short ride. Everything was working fine just the other day (last time I drove the truck) but today 0 pressure. I checked for power from the engine and that was fine, but no power back to the pump. So the problem is somewhere in the wire harness. I did a quick check just to see if there was anything obvious, but everything looked pretty good. The connectors looked good as well. I'm going to be removing the harness tomorrow and I wanted to know if anyone knew of a place that sold just the wire harness? Is there an in-line fuse on the supplied harness? I don't remember one being there when I installed it, but it was a little while ago so I can't really remember if there is or not.
Thanks.
FWIW, the pump has been on the truck for about a year and a half and about 50,000 miles and this is the first time the pressure was anything but 15 psi.
Thanks.
FWIW, the pump has been on the truck for about a year and a half and about 50,000 miles and this is the first time the pressure was anything but 15 psi.
