Nodwell Cummins conversion

[benefits]

I am in the process of doing a Cummins conversion on a Nodwell. I will try to get pics in here soon but I am in need of the crossover tube from the 89-91. 5 trucks. It is an intercooled 91. 5 but have no intercooler and no room, willing to trade for excess i/c parts; I beleive 4 boots and connecting pipes. Just in need of the connecting pipe that goes over the valve covers and other assorted hardware to connect the turbo outlet to the intake manifold. Not sure if this is the right place to post this but I figured that alot of people have done the non i/c to i/c conversion so maybe there were some of thoes tubes laying around.

 

[JLEONARD]

The turbo outlet on the non ic turbo is smaller so you will need to adapt it.

If you send me an e-mail to me at -- email address removed -- I can send pics of the new crossover tube I made for mine out of 3 inch pipe.

It will give you another option so you don't have to choke down your air flow.

After you see the pics, if you still want a factory crossover tube we can talk as I have mine in the "junk" box.

Jay

 

[DValentine]

What may I ask, is a Nodwell?

 

[Headshot zod]

a crossover tube just was up for bid a few days ago on ebay. I think it went for $28 bucks. You may want to check to see if there are any others.



Nodwell

 

[DValentine]

Hey, that's a cool machine. Is it hydraulicly driven or does it have a gearbox and axles?

 

[benefits]

It has gear boxes and axles The engine is mated up with the getrag and a t-case we are looking to have the t-case so that we can engage the front driveshaft or rear driveshaft or both in order to run the PTO Winch off of the front driveshaft.