Northwest Custom Mud Flaps

[Archive]

Looking to put mud flaps on my 2001 3500 and like these lot, anyone would like to put their 2 cents in on it and if you have any pictures i would love to see some. You can e-mail direct to me
Tommy

------------------
2001 DODGE RAM 3500 4X4 QUAD CAB LOADED WITH LEATHER

 

[Archive]

Tommy, here's a shot of my truck. BTW, it didn't come out too good in the photo, but there's a TDR logo hitch plug in the hitch receiver that was also made by Northwest Custom, along with the Cummins "C" logo on the toolbox.
Andy
#ad


You might also refer to this topic: https://www.turbodieselregister.com/ubb//Forum3/HTML/001218.html

[This message has been edited by Andy Perreault (edited 07-29-2000). ]

 

[Archive]

I have a front (12" wide) and rear (18" wide) set of NW Custom brushed stainless steel/rubber mud flaps that I'm extremely happy with! #ad
The NW Custom mud flaps replaced several different sets of Mopar mud flaps that were marginal at best. #ad
This is by far, one of the very best accessories that I have purchased for my Ram. In addition, I've purchased many other brushed stainless steel accesories from Jason (Burton), owner of NW Custom, all of which have been of the highest quality.

------------------
'98. 5 2500 QC 4x4 Sport, Glasstite Vision II, 285 BFG A/Ts on M/T Challengers, Warn 4X Boards, Mopar fender flares, NW Custom s/s-rubber mud flaps, Mag-Hytec diff. cover/trans. pan, Edelbrock IAS shocks, Mopar tow hooks, Reese Titan V hitch, VDO Vision gauges, '00 Sport grille, '00 Sport headlights with PIAA Super White bulbs, PIAA Dual Sport 900 aux. lights, BD exh. brake and TorqLoc, Prime-Loc, Bosch 275s, VA CPC, DD Boost Module, Banks Stinger wastegate actuator, '00 valve cover, Banks 4" dia. s/s exh. sys. , BD LV V10/Cummins hybrid TC & valve body, BD modified trans. front pump & PressureLoc, Air Bulldog induction hood (with NACA ducts), plus MANY other trick modifications

 

[Archive]

Andy,
Was curious where you got your rear bumper.
Mike

 

[Archive]

My rear bumper was made by Paul Rickard in Placentia, Calif. Those of you who have read Four Wheeler magazine for years may be familiar with the "Turtle Expedition" truck, the Ford PSD used by Gary and Monika Wescott to travel around the world. Paul made their bumpers (not the ones on their newest F550, though), and that's how I heard of him. I'm sorry to say that Paul closed up his shop and moved to Northern California near Placerville just a few months after he made my bumper. He had heart bypass surgery, and Gary Wescott told me that he heard (but couldn't confirm) that Paul had cancer, too.
Jason Burton, owner of Northwest Custom, is now making rear bumpers. Here's a picture from his website of the rear bumper on his truck, I believe he has built himself a newer one than this one.
#ad

Andy

[This message has been edited by Andy Perreault (edited 08-01-2000). ]