nv5600 master cylinder

[btanner]

I am finishing up my cummins conversion and I am trying to figure out what to use for the master cylinder for my transmission. Is there a generic master cylinder that will work for these trucks or do I need to go to the stealership and purchase one for a 6sp from them? Any help would be much appreciated.



-ben

 

[Tcolesanti]

I figure a replacement from napa, or a local auto parts store is just fine. I have a slave cylinder in my truck that I bought from a local parts store, it works a lot better than the old one.

 

[PSullivan]

i used the dodge master/slave setup. i measured 1 7/16"of piston travel at the master. i made brackets that mounted it to the stock toyota studs on the firewall. i put a knotch in the pedal to get more throw. it works well.