NW BOMB party

[Archive]

February 17th, at 9am. It will be at my house again, if you need directions, email me.
So far, we have two gauge installs, a jardine exhaust, and maybe an espar heater to begin on. Looks like we will need some help, so grab a few tools and come on over. If the weather does not hold for us, we will just pull one "nose in" to the garage and work on it in there.
Don't forget your cameras!
Questions? Comments?

------------------
Rob Hanson
1999 "Big Red", 3500 SLT QC 4X4 6 spd, 4. 10 LSD, Braided SS fuel lines, Mag-Hytec Rear Cover, Cummins E-Brake, Blue Box, DD3 Injectors, Banks High Ram and 14cm Wastegated Turbo, All-steel Cowl Induction Hood, Cummins RED Valve Cover, Rhino, Rosewood Kit, Scotty System, SportComp Gauges, TorkLift SuperHitch, Tekonsha Brake Controller, Rear Flood lights, Cobra CB, DeeZee Running Boards, BD 2WD Low kit, Air Lift bags, Hitco exhaust blanket and a Geno's "I tromped a Ford" decal. Member of BOMB! (WW NW Chapter)

MyPics.com (pics updated 10/14/00)

I'd rather be... .
Cummin than Strokin.

[This message has been edited by Rob Hanson (edited 01-21-2001). ]

 

[BIG BOB]

I'll be there with my sweetheart. Looking forward to seeing everyone again. Rob you are going to have to build a BOMBing shop!

Hey Vaughn,
Want to convoy over on the 16th?

How about it Papa Joe, you going to make this one?

 

[BIG BOB]

Just found out the Papa Joe was in an accident Friday about 5:15 on his way home. His truck got totalled. I'll give him a call tomorrow. Banged up pretty good. See his post;
https://www.turbodieselregister.com/ubb//Forum8/HTML/001251.html

 

[John]

Geez, I hope Papa Joe is OK.

Hang in there buddy... and don't get too cozy with that Duramax. #ad


__________________________________________________________________________________________

I'll be there... hope to have a few new goodies installed by then. What's left? #ad


Bob (Wagner), are we installing your Bosch 275s that day?

 

[Bob Beauchaine]

Hi Rob
I would love to join you guys - if that's ok - but I work Saturdays and they are difficult for me to get off. If this might spill over to Sunday let me know. I've been looking for an active TDR chapter in the NW and have been watching for one of your activity posts.
Happy Trails

------------------
1993 250 4X2 - Banks Power Pack, BD Power Injectors, K&N Air Filter, 6 gauges and tweaked pump. 27lbs boost unloaded.
Horton fan & NV4500 5 speed.

 

[Andy Perreault]

Yup, count me in!
Andy

 

[Bob Wagner]

Does anyone know who owns the black 2500 with Washigton plate number 727

I noticed the gold TDR emblem on the tailgate.

Just curious

[This message has been edited by Bob Wagner (edited 01-22-2001). ]

 

[Justbeamn]

I have some cosmetic add ons (catz lights and signal mirrors). I know they are not "Bombing" but can we get them in. I would enjow meeting all of the NW Bombers!

------------------
98. 5 3500 SLT Quad Dually 4x4. 3:54 Auto, Waterfall Blk on red. Custom dually flaps, All acc's w/leather
BD exhaust brake, dash mount Banks guages, Mag-Hytec Diff. cover & trans. , SS bug screen and fender trim,SS Stull diamond line running boards, SS 4" turn down.

 

[Shelby Griggs]

I may try to come up from Bend, although it is a long haul. Wouldn't mind getting some gauges installed, wife says the e-brake money is on hold for awhile. My brother lives in Bothell. Rob, how far is Enumclaw from Bothell? I am thinking of making a 3 day weekend if I come up.

Would be neat to meet some NW members and start putting a face with the names.

Shelby

------------------
2001. 5 2500 QC LB 4WD, ETH (Built 09-10-00), DEE, 3. 54 gears, Laramie SLT, Camper Special, Trailer Tow, Travel Convenience Group, Power Driver Seat, Alarm System, Remote Keyless Entry, Fog Lamps, Cab Clearance Lamps, HD Transfer Case, Bright White with a Gray Interior. Built 09-15-00, took delivery on 10-06-00, 3873 miles as of 01-04-01. Custom aluminum work body / flat bed. Coming soon: E-Brake and gauges.

 

[Archive]

Surv. Shelby... Bothell is about an hour driving from Enumclaw... less if you have 3. 54 rearend!
Justbeamn... Lots of people come, wash their truck or just help others... Don't have to BOMB to show up! Bring them and we will try!

When I get home tonight, I will try to email directions to those posted here that are first-timers!

 

[Scollins]

Rob,
With all the BOMB parties scheduled, you need to get one of these babies! Only $2899 through Harbor Freight, with free shipping! 9000 lb capacity...
#ad

I hope we have enough hands around, as I will have gauges to install by then. #ad



------------------
Scott Collins
'98 Ram 2500 4x4 12 Valve Cummins. Slightly BOMBed! #ad

Renton, WA


[This message has been edited by Scollins (edited 01-22-2001). ]

 

[Archive]

Scott... wish I could. I am taking donations for my 4 stall shop though... monetary and labor!

 

[Papa Joe]

Hey, you guys never offered to wash my truck !!
Instead of BOMBing, Mary Beth and I are considering a strafing run. That is if you don't mind a Ford Explorer in the driveway #ad


Joe

------------------
99 Ram. Served me, saved me.

 

[Archive]

John... not very darn much!

Bob Beauchaine... you are welcome to come up to any event we have going. Always.

Big Bob... by the 17th, Papa Joe may need to come over just to get out of the house awhile! I've seen you and your bride. . I am sure neither of you would mind sitting closer and letting him come with ya. I'll even set up a "special" place for him to sit in the garage. hehehe.

 

[Scollins]

Originally posted by Rob Hanson:
Scott... wish I could. I am taking donations for my 4 stall shop though... monetary and labor!

I've been known to swing a hammer or two. Actually, I prefer pneumatic nail guns. I've got access to a 16 D stick nailer and a compressor, as well as a compound miter saw. My dad and I built a 20' x 20' garage on his property. Also, anybody that does roofing WITHOUT a pneumatic roofing gun is CRAZY! #ad
Let me know when, and I'll help out. .

------------------
Scott Collins
'98 Ram 2500 4x4 12 Valve Cummins. Slightly BOMBed! #ad

Renton, WA


[This message has been edited by Scollins (edited 01-23-2001). ]

 

[MikeR]

I wish I could be there to turn some wrenches,but I'll be on vacation and won't be getting home 'til Sunday eve the 18th.

-Mike

 

[Bob Wagner]

I will be there

 

[Archive]

Papa Joe... you would be welcome in anything! I have had fords, toyotas, etc, here. Come on over!

I will seriously set up a special chair for ya in the garage!

Scott... thanks! Maybe as summer starts.

 

[Diesel Freak]

hey count this oregon rammer in, but I need directions again. Hopefully I don't get sick this time and have to cancel. I might even show up this sunday.

 

[jcbrown]

I will be ocean diving near Port Hardy, Vancouver Island, British Columbia. Next time?