Here I am

Output seal part #

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

NEED HELP CLOCKING AN HX-40 TURBO

Rancho steering dampner for 1 ton 4x4?

Status
Not open for further replies.
Parts man gave me the wrong seal for my 97'3500 4x4 5spd. The invoice has 4746258 SEAL OUTP 21060012 which is too small in diameter. Looked the same from a distance. I dropped the shaft, popped out the seal and oh oh. Good thing I did not totally ruin the old seal. Called him up but he could not be sure of the number. I may need a new parts man as well. Thanks in advance.

------------------
97'3500 SLT CC,4x4,5 spd,4. 10,83K,EBY aluminum flatbed,Dee Zee running boards,Dee Zee Platinum drop boxes,Mag-Hytec,BD Brake,Pyscotty,Jardine 4",Geno's monster tip,TST plate,Bilstein,Isspro,KN,PIAA Superwhites,Tekonsha Sentinel,25' 14k beavertail gooseneck,Hale 2 horse BP
 
QRTRHRS,

R U talking about the transfer case tail shaft seal?

I had to get the # off of the plate that is riveted to the transfer case. Its above the driveshaft at the back of the case. Easy to spot.


[This message has been edited by HEMI®Dart (edited 08-10-2000). ]
 
Status
Not open for further replies.
Back
Top