Engine/Transmission (1998.5 - 2002) P-pump pictures

[OPoole]

Here is a picture of Karl Mireiter 2001 24v now p-pumped. Like to say thanks to Karl he has been a great customer!! Thanks Man i have enjoyed working with you. Thanks Olee

 

[mhenon]

Nice! Does the P-pumped 24 valve engine "have" to have a new cam for the mechanical fuel pump or will an external electrical LP do the job?

What fuel pressure does the P7100 want at the inlet?

Mike

 

[OPoole]

This has F1 cam with lobe. . But a big fuel system A1000 elec. pump

 

[bmoeller]

What fuel pressure does the P7100 want at the inlet?

A stock 12v P-pumped truck specs at 18-24 psi at idle, 28-36 at 2000 rpm with no load.

 

[mhenon]

So. . I guess what I'm asking can you just leave the old 24V cam in place and supply the needed fuel pressure with an electrical LP. . like a FASS or something provided it supplies the correct pressure?

Mike

 

[isb360]

Do I also see the ATS 3-pc manifold?



And what turbo is that?

 

[mhenon]

Yeah. . it looks like the ATS. I was more interested in the air filter and plumbing to the turbo. Nice straight shot.

Mike

 

[OPoole]

Yes ATS and HTT pro66 turbo a AFE filter with some piping i tig up.

 

[Jong]

Hey Olee- where did you relocate the batteries to? On the frame, or somewhere else? Looks nice and clean in that engine compartment!!!!

 

[Devan Manis]

could the coolant overflow on a hard run and get sucked into the filter?

 

[OPoole]

If it was to run hot it could.

 

[isb360]

Olee -- what is this combo worth on the dyno and other than sexy good looks is there a tangible flow improvement with ATS intake. I am no fluid dynamics expert, but it sure LOOKS like it would get air into engine more cleanly without the OEM restrictive bends.



Second question: What does this truck run in the quarter?



Thanks much!



Tim

 

[OPoole]

Combo does work it's not just for looks it's not where Karl wants it to be yet. In time and tuning you see some videos of 1/4 mile. Will update you 1st of the year

 

[isb360]

Thanks Olee. I am always interested in the incremental improvements provided by different modifications. Will look forward to more after Xmas.



Tim

 

[Graphic man]

nice work!!!!!... ... you should sell them AFE filter with the piping... looks sweet !!!





I'd like to have one of them my-self !!!

 

[mhenon]

Yes ATS and HTT pro66 turbo a AFE filter with some piping i tig up.

Olee. . what would it cost to "TIG" up a few more of them?

Mike

 

[ctd8999]

I saw the truck in person last Friday at Dragway 42. The P- pump really looked good on the 24 valve. That is a nice pipe you fab for the air intake. Congrats to you and Karl. Thanks Steve B.

 

[Josh1]

how much timing

just wondering how much timing karl

is running and what cam shaft

 

[OPoole]

Started out with 20* F1 diesel stage 2 cam with bolt-on gear.

 

[Forrest Nearing]

is that a shut-down valve in the filter tract?