P0341 problems

[JohnnieBishop]

I have a 2003 Dodge with Fass Titanium, and TS Performance MP8. Already replaced cam shaft position sensor and checked the wires, and no problem. Ran fine for a week and turned my chip back up and started missing again. Now have a check engine light on for the same problem even after disconnected the chip and the batteries for 2 days.



Any help will be appreciated.

 

[Prairie Dog]

I got so tired of my TST PowerMax causing cam sensor and other problems that I cut it out of the truck and tossed it in the dumpster. Sorry, I know it's unrelated but just wanted to vent.

 

[JJPage]

If you clear the code with the TS physically removed, does the code return?

 

[JohnnieBishop]

not sure. dont have the equipment to clear the code and when i disconneted the batteries the code was still set and check engine light was still on.

 

[Bob4x4]

Battery disconnect will not clear codes on newer vehicles. If you plan on working on your truck yourself buy a scanner or get used to beating your head against the wall

 

[JJPage]

not sure. dont have the equipment to clear the code and when i disconneted the batteries the code was still set and check engine light was still on.

Go to Autozone or NAPA, they will clear your codes for free. Then see what happens, my bet is the TS is failing. If the codes do not return with the TS removed, you found the problem.