Engine/Transmission (1994 - 1998) P7100 pump ####s

[K LeClair]

I was told my told my '95 CTD had a '97 pump put in it. I would like to know for sure. I got these numbers off the back of the pump. RQV 400 1250PA1212k and CDC N 392 9688. Can anyone help me identify my pump???I can't find any websites that list bosch part numbers. Thanks

 

[Scot]

That number is not the actual pump number. The one you want is on the side of the main pump housing.

 

[RonA]

Look behind the throttle linkage below the number 2 delivery valve. number will be something like 0 402 736 913. I had to make a little angled mirror on a welding rod to read it.

 

[K LeClair]

First I want to say thanks so much fot the help. I found the plate under #2 delivery valve. second set of digets read 0 402 736 885. The last 3 digets were tough to see (at night with a flash light). I believe the 88 is correct,the last diget is ????. Thanks

 

[Smokin59 4x4]

If it is 885 at the end, it's a 180 pump.

 

[K LeClair]

Thanks Ian and everyone for helping. I consider myself lucky to have a site and members like yourselves for help. I'm a pretty quick learner and someday I will be able to help others as well. I know I'm probably killing you guys with these questions. What do you estimate my power at???Stock HX35W 39PSI, K&N cold air kit,Full 4" exhaust,NO muffler or converter,TST #5 plate full forward,96' 180 pump. I'm not sure if it has different injectors or what my timing is set at??That is the next item on my list. Followed by 3KGSK,injectors and new turbo. My truck doesn't seem to go much past 2700 and falls flat around 2300-2400. I don't pull anything at the moment so the transmission should stay together a little longer with more engine mods. It has a converter in it. Again,I'm not sure what make and a BD pressure loc that I have yet to install. Thanks for any more ideas. I will take a guess on HP being around 275???? Keith